-
Member
Reputation: 83
Tunning of C-DRX Parameters in Huawei eRAN 8
Hi Guys
can you give your opinion regarding the below tuning of C-DRX
On-Duration Timer NOW:PSF2 Suggestion:PSF10
DRX Inactivity Timer NOW:PSF80 Suggestion:PSF200
Long DRX Cycle NOW:SF40 Suggestion:PSF320
Short DRX Cycle Timer NOW:1 Suggestion:2
all remaining parameters are defaulted
Last edited by mashi123; 2017-05-26 at 03:03 PM
-
2017-05-26 02:59 PM
# ADS
Circuit advertisement
-
Member
Reputation: 238
Re: Tunning of C-DRX Parameters in Huawei eRAN 8
-
Member
Reputation: 83
Re: Tunning of C-DRX Parameters in Huawei eRAN 8
guys please your support , did u tune these parameters before and what was the result , the reason of tuning is issue of high battery consumption , we bench-marked two operators , it seems that ours is consuming much higher than the other operator , rf conditions are good , resources allocated in both cases are not much different. in idle mode both mobiles are consuming relatively similar Current (something around 7 mA) so we assumed that the issue is with the radio power consumption
Last edited by mashi123; 2017-05-28 at 02:23 AM
-
Member
Reputation: 83
Re: Tunning of C-DRX Parameters in Huawei eRAN 8
Originally Posted by
Boraa
could you share the kpi
dear
the new settings still not implemented ,as im not sure what are the good values , i will share after implementation
-
Senior Member
Reputation: 491
Re: Tunning of C-DRX Parameters in Huawei eRAN 8
Originally Posted by
mashi123
dear
the new settings still not implemented ,as im not sure what are the good values , i will share after implementation
Good luck friend,
kindly update us with the result please
Bookmarks