Thanks Thanks:  11
Page 1 of 2 12 LastLast
Showing results 1 to 10 of 12

Thread: Mimo 2x2 in using PCtel IBFlex !

  1. #1
    Member Reputation: 125
    Join Date
    2012-03-16
    Posts
    239


    Default Mimo 2x2 in using PCtel IBFlex !

    Dear experts
    We're using PCtel Seegui Ibflex to measurement. However, in logfile we cannot find information of Mimo 2x2 ( Rx0Tx0, Rx0Tx1, Rx1Tx0, Rx1Tx1 in LTE cell scan ) . We're already set Tx=2 and Rx=2, usign 2 anten when testing.
    So please help in this problem. Does PCtel Seegui IBFlex support Mimo 2x2 ?

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Junior Member Reputation: 11
    Join Date
    2014-04-07
    Posts
    11


    Default Re: Mimo 2x2 in using PCtel IBFlex !

    Do you have MIMO license activated in your scanner?

  4. #3
    Member Reputation: 125
    Join Date
    2012-03-16
    Posts
    239


    Default Re: Mimo 2x2 in using PCtel IBFlex !

    Quote Originally Posted by drontgtn View Post
    Do you have MIMO license activated in your scanner?
    I see it can put 02 anten, and can config 2x2 in script then running

  5. #4
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    563


    Default Re: Mimo 2x2 in using PCtel IBFlex !

    yea, IMHO IBflex need "LTE Enhanced Signal 2Rx MIMO" feat

    for Mxflex need "LTE Enhanced Signal 2Rx MIMO"
    and it support :
    "LTE Enhanced Signal 4Rx MIMO"
    "LTE Channel Matrix 4Rx MIMO"


    tdlte similar/
    Last edited by carver; 2017-09-22 at 06:30 AM
    /carv

  6. Thanks riverstreamer thanked for this post
  7. #5
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    563


    3 out of 3 members found this post helpful.

    Default Re: Mimo 2x2 in using PCtel IBFlex !

    general PCTel MIMO Scanner Presentation and PCTel MIMO Training,
    maybe it can't be on the forum.
    Attached Files Attached Files
    /carv

  8. #6
    Member Reputation: 35
    Join Date
    2007-11-27
    Posts
    119


    2 out of 2 members found this post helpful.

    Default Re: Mimo 2x2 in using PCtel IBFlex !

    if you are using TEMS, pls according my setting as attached.

    MIMO-setting.jpg

  9. Thanks carver thanked for this post
  10. #7
    Member Reputation: 125
    Join Date
    2012-03-16
    Posts
    239


    Default Re: Mimo 2x2 in using PCtel IBFlex !

    Quote Originally Posted by carver View Post
    general PCTel MIMO Scanner Presentation and PCTel MIMO Training,
    maybe it can't be on the forum.
    Tks mate. I've already put right config, but no Mimo, although LTE Enhanced Signal 2Rx MIMO options has installed

  11. #8
    Member Reputation: 125
    Join Date
    2012-03-16
    Posts
    239


    Default Re: Mimo 2x2 in using PCtel IBFlex !

    Quote Originally Posted by crisnspro View Post
    if you are using TEMS, pls according my setting as attached.

    MIMO-setting.jpg
    Tks pro, I've already put like this, but didn't appear in TDD. But when you put Rx=1, Rx0Tx1 and RxoTx0 appear @@ . My PCtel already has LTE Enhanced Signal 2Rx MIMO option. And could you please share how to config video streaming access to you tube in TEMS . Tks a lot

  12. #9
    Moderator Reputation: 520
    Join Date
    2008-04-11
    Posts
    431


    1 out of 1 members found this post helpful.

    Default Re: Mimo 2x2 in using PCtel IBFlex !

    Hi
    Here is the list of a complete set of IBFlex Licenses:

    Installed Options
    --------------------------------------------------------------
    10MHz-6000MHz Capability........................: 7700-0000
    Dual RF Port....................................: 000F-0000
    570MHz-3800MHz Model............................: 7031-0000
    GPS Navigation..................................: 0001-0000
    Absolute Time Stamp.............................: 0005-0000
    WiFi USB Adaptor................................: 0009-0000
    Bluetooth Interface.............................: 0007-0000
    Ethernet Interface..............................: 000C-0000
    Recording to SD Card............................: 000A-0000
    GSM Blind Scan..................................: 000B-0001
    IS-95 Blind Scan................................: 000B-0003
    WCDMA Blind Scan................................: 000B-0004
    CDMA Blind Scan.................................: 000B-0005
    EVDO Blind Scan.................................: 000B-0006
    LTE Blind Scan..................................: 000B-000A
    TDLTE Blind Scan................................: 000B-000B
    TDSCDMA Blind Scan..............................: 000B-0008
    WiFi Support....................................: 0001-000C
    WiFi Blind Scan.................................: 000B-000C
    Spectrum Analysis...............................: 0003-0000
    Enhanced Power Scan.............................: 0006-0000
    LTE Support.....................................: 0001-000A
    LTE L3 Message Decoding.........................: 0005-000A
    IS-95 Support...................................: 0001-0003
    IS-95 Pilot.....................................: 0003-0003
    IS-95 Extended Dynamic Range....................: 0008-0003
    CDMA Support....................................: 0001-0005
    CDMA Pilot......................................: 0003-0005
    CDMA Extended Dynamic Range.....................: 0008-0005
    EVDO Support....................................: 0001-0006
    EVDO Pilot......................................: 0003-0006
    EVDO Extended Dynamic Range.....................: 0008-0006
    TDSCDMA Support.................................: 0001-0008
    TDSCDMA Pilot...................................: 0003-0008
    TDSCDMA BCH Decoding............................: 0005-0008
    LTE Enhanced Signal Scan........................: 000C-000A
    LTE Enhanced Signal 2Rx MIMO....................: 002C-000A
    TDLTE Support...................................: 0001-000B
    TDLTE Enhanced Signal 2Rx MIMO..................: 002C-000B
    TDLTE Enhanced Signal Scan......................: 000C-000B
    TDLTE Power Analysis............................: 000D-000B
    TDLTE L3 Message Decoding.......................: 0005-000B
    GSM Support.....................................: 0001-0001
    GSM BSIC........................................: 0002-0001
    GSM BCCH C/I....................................: 0004-0001
    GSM BCCH Layer3.................................: 0005-0001
    WCDMA Support...................................: 0001-0004
    WCDMA Pilot.....................................: 0003-0004
    WCDMA BCH Decoding..............................: 0005-0004
    WCDMA Extended Dynamic Range....................: 0008-0004

    I think you need to have those Dual RF Port and LTE Enhanced Signal 2Rx MIMO to enable the feature.

    Regards,
    -pt-

  13. Thanks carver thanked for this post
  14. #10
    Member Reputation: 35
    Join Date
    2007-11-27
    Posts
    119


    Default Re: Mimo 2x2 in using PCtel IBFlex !

    send me your email, I may use the teamviewer to operate it help u.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •