Mimo 2x2 in using PCtel IBFlex !

[bluep]

Dear experts
We're using PCtel Seegui Ibflex to measurement. However, in logfile we cannot find information of Mimo 2x2 ( Rx0Tx0, Rx0Tx1, Rx1Tx0, Rx1Tx1 in LTE cell scan ) . We're already set Tx=2 and Rx=2, usign 2 anten when testing.
So please help in this problem. Does PCtel Seegui IBFlex support Mimo 2x2 ?

[drontgtn]

Do you have MIMO license activated in your scanner?

[bluep]

Do you have MIMO license activated in your scanner?

I see it can put 02 anten, and can config 2x2 in script then running

[carver]

yea, IMHO IBflex need "LTE Enhanced Signal 2Rx MIMO" feat

for Mxflex need "LTE Enhanced Signal 2Rx MIMO"
and it support :
"LTE Enhanced Signal 4Rx MIMO"
"LTE Channel Matrix 4Rx MIMO"


tdlte similar/

[carver]

general PCTel MIMO Scanner Presentation and PCTel MIMO Training,
maybe it can't be on the forum.

[crisnspro]

if you are using TEMS, pls according my setting as attached.

MIMO-setting.jpg

[bluep]

general PCTel MIMO Scanner Presentation and PCTel MIMO Training,
maybe it can't be on the forum.

Tks mate. I've already put right config, but no Mimo, although LTE Enhanced Signal 2Rx MIMO options has installed

[bluep]

if you are using TEMS, pls according my setting as attached.

MIMO-setting.jpg

Tks pro, I've already put like this, but didn't appear in TDD. But when you put Rx=1, Rx0Tx1 and RxoTx0 appear @@ . My PCtel already has LTE Enhanced Signal 2Rx MIMO option. And could you please share how to config video streaming access to you tube in TEMS . Tks a lot

[parto_tegal]

Hi
Here is the list of a complete set of IBFlex Licenses:

Installed Options
--------------------------------------------------------------
10MHz-6000MHz Capability........................: 7700-0000
Dual RF Port....................................: 000F-0000
570MHz-3800MHz Model............................: 7031-0000
GPS Navigation..................................: 0001-0000
Absolute Time Stamp.............................: 0005-0000
WiFi USB Adaptor................................: 0009-0000
Bluetooth Interface.............................: 0007-0000
Ethernet Interface..............................: 000C-0000
Recording to SD Card............................: 000A-0000
GSM Blind Scan..................................: 000B-0001
IS-95 Blind Scan................................: 000B-0003
WCDMA Blind Scan................................: 000B-0004
CDMA Blind Scan.................................: 000B-0005
EVDO Blind Scan.................................: 000B-0006
LTE Blind Scan..................................: 000B-000A
TDLTE Blind Scan................................: 000B-000B
TDSCDMA Blind Scan..............................: 000B-0008
WiFi Support....................................: 0001-000C
WiFi Blind Scan.................................: 000B-000C
Spectrum Analysis...............................: 0003-0000
Enhanced Power Scan.............................: 0006-0000
LTE Support.....................................: 0001-000A
LTE L3 Message Decoding.........................: 0005-000A
IS-95 Support...................................: 0001-0003
IS-95 Pilot.....................................: 0003-0003
IS-95 Extended Dynamic Range....................: 0008-0003
CDMA Support....................................: 0001-0005
CDMA Pilot......................................: 0003-0005
CDMA Extended Dynamic Range.....................: 0008-0005
EVDO Support....................................: 0001-0006
EVDO Pilot......................................: 0003-0006
EVDO Extended Dynamic Range.....................: 0008-0006
TDSCDMA Support.................................: 0001-0008
TDSCDMA Pilot...................................: 0003-0008
TDSCDMA BCH Decoding............................: 0005-0008
LTE Enhanced Signal Scan........................: 000C-000A
LTE Enhanced Signal 2Rx MIMO....................: 002C-000A
TDLTE Support...................................: 0001-000B
TDLTE Enhanced Signal 2Rx MIMO..................: 002C-000B
TDLTE Enhanced Signal Scan......................: 000C-000B
TDLTE Power Analysis............................: 000D-000B
TDLTE L3 Message Decoding.......................: 0005-000B
GSM Support.....................................: 0001-0001
GSM BSIC........................................: 0002-0001
GSM BCCH C/I....................................: 0004-0001
GSM BCCH Layer3.................................: 0005-0001
WCDMA Support...................................: 0001-0004
WCDMA Pilot.....................................: 0003-0004
WCDMA BCH Decoding..............................: 0005-0004
WCDMA Extended Dynamic Range....................: 0008-0004

I think you need to have those Dual RF Port and LTE Enhanced Signal 2Rx MIMO to enable the feature.

Regards,
-pt-

[crisnspro]

send me your email, I may use the teamviewer to operate it help u.