Thanks Thanks:  27
Page 3 of 3 FirstFirst 123
Showing results 21 to 27 of 27

Thread: Nemo Outdoor 7.8.0.8 with MED

  1. #21
    Member Reputation: 25
    Join Date
    2015-01-07
    Posts
    34


    1 out of 1 members found this post helpful.

    Default Re: Nemo Outdoor 7.8.0.8 with MED

    Thanks, both of them works. If anyone is interested, the 7.8.2.18 which seems to be the latest working with the MED, is from 2016.09.19. The original 7.8.0.8 is from 2016. early April.

    If anyone has newer installer than
    7.8.2.18 from the 7.8.x.x or the 7.9.x.x series, please post it, so we can take a look.

    This is whats new in 7.8.2 since the original 7.8.0.8 release for Qualcomm:

    Version 7.8.2 (7.9.2016)


    • Added support for 4x4 MIMO measurements. (MIMOMEAS, CI)
    • Added support for EVS codec with Qualcomm IMS stack based devices. (AMRS, FER)
    • Improved Q.850 cause code and dropped IMS call handling. (CAF, CAD)
    • Fixed problem with SFTP automatic window scaling
    • Updated Instagram to comply with the new API
    • Fixed problems with IPerf manual testing
    • Fixed problem with PEVQ-S timeout while video was still playing
    • Fixed a problem with phone number being invalid when INVITE SIP message was missing. (CAA)

    Version 7.8.1 (28.6.2016)


    • Added support for LTE RACH contention resolution msg4 decoding failures parameter. (RACHI)
    • Added support for LTE UE category 10 devices.
    • Fixed a problem that caused data throughput not to be logged for less than one second long data transfers. (DRATE)
    • Fixed a problem that caused with some devices UMTS cell measurement results to disappear for a while after cell change. (CELLMEAS)
    • Fixed a problem that sometimes caused RRD measurement event to be logged immediately after Radio Resource Allocation Attempt. (RRD)
    • Fixed a problem where VoWiFi and ViWiFi calls were sometimes incorrectly logged with dropped out of service status. (CAD)
    • Fixed a problem where E2E VoLTE calls were sometimes incorrectly logged as normal disconnects instead of early release. (CAD)
    • Fixed a problem where delayed SIP messages for previous VoLTE call caused current call to get disconnected. (CAD, CAF)
    • Fixed a problem where delayed SIP messages for previous VoLTE call caused erroneous call attempt to be logged. (CAA)
    • Improved detection of dropped IMS calls during call setup with NMR. (CAD)
    • Fixed a problem where LTE requested throughput was fluctuating in stabile environment. (CQI)
    • Fixed a problem where CDMA channel and band number were incorrect.
    • Fixed a problem where early release call disconnect status was reported incorrectly with received CDMA call. (CAD)


    Last edited by subway; 2019-02-26 at 12:32 AM

  2. Thanks Roman99 thanked for this post
  3. #22
    Member Reputation: 25
    Join Date
    2015-01-07
    Posts
    34


    1 out of 1 members found this post helpful.

    Default Re: Nemo Outdoor 7.8.0.8 with MED

    More updates: I found version 7.9.0.10, and did the install exactly same as the original tutorial said, and it works properly. Here is the DL link:

    http://www.fileyogi.com/?software=nemo-outdoor-7-9-0-10

    What I noticed is although at the end of applying the MED (which means the 7.8.0.8 exe and some DLLs are overwritten), most of the DLLs (including the parsers) are applied from the new version. It is however still unclear that the new features are actually usable, as we dont know which part of these features relies on the EXE, and which features are coming from the DLLs.

    None the less, 7.9.0.10 seems to be crackable the same way 7.8.0.8 did.

    MOd: apparently the change in MapX version in 7.9 prevents the old 7.8.0.8 way, as the map load will fail. Will try to backport some DLLs, lets see if this is fixable.
    Last edited by subway; 2019-02-27 at 02:21 AM

  4. Thanks techfolkcmr, Roman99 thanked for this post
  5. #23
    Member Reputation: 93
    Join Date
    2017-09-05
    Posts
    81


    Default Re: Nemo Outdoor 7.8.0.8 with MED

    yes it can use same dll file

    and last version is 8.5.0.5 now

  6. #24
    Member Reputation: 25
    Join Date
    2015-01-07
    Posts
    34


    Default Re: Nemo Outdoor 7.8.0.8 with MED

    Quote Originally Posted by keysightseller View Post
    yes it can use same dll file

    and last version is 8.5.0.5 now
    I know the latest is 8.5.0.5, but there is no available medicine to any 8.x version Nemo as to my knowledge.

    In terms of DLLs, you referring to version 7.9.0.10? So the same DLLs for the Mapx issue we can use the old Mapx DLLs to make tit compatible?

    I am having an issue with a Qualcomm X12 based modem with version
    7.8.2 which not reports many things including SINR, RS SINR, PDSCH error rate etc. This is why I am looking for a slightly newer version to see if this might be a parsing error in Nemo, so a newer parser DLL might fix the issue. No luck so far...

  7. #25
    VIP Member Reputation: 861 hp3hp3's Avatar
    Join Date
    2010-01-02
    Location
    Ascom
    Posts
    827


    Default Re: Nemo Outdoor 7.8.0.8 with MED

    last is 8.5.0.8 now

    Quote Originally Posted by keysightseller View Post
    yes it can use same dll file

    and last version is 8.5.0.5 now

  8. #26
    Junior Member Reputation: 9
    Join Date
    2019-03-06
    Posts
    11


    Default Re: Nemo Outdoor 7.8.0.8 with MED

    Quote Originally Posted by subway View Post
    I know the latest is 8.5.0.5, but there is no available medicine to any 8.x version Nemo as to my knowledge.

    In terms of DLLs, you referring to version 7.9.0.10? So the same DLLs for the Mapx issue we can use the old Mapx DLLs to make tit compatible?

    I am having an issue with a Qualcomm X12 based modem with version
    7.8.2 which not reports many things including SINR, RS SINR, PDSCH error rate etc. This is why I am looking for a slightly newer version to see if this might be a parsing error in Nemo, so a newer parser DLL might fix the issue. No luck so far...
    7.8.2 cannot full handle Qualcomm X12
    try copy the decode dll file

  9. #27
    Senior Member Reputation: 282
    Join Date
    2010-10-08
    Posts
    269


    Default Re: Nemo Outdoor 7.8.0.8 with MED

    Any list of commercial available qualcomm chipsets phone/modems that can be used in TEMS/NEMO.

    Quote Originally Posted by general.1979 View Post
    7.8.2 cannot full handle Qualcomm X12
    try copy the decode dll file
    Please add reputation by clicking * at left bottom of post & Hit Thanks and report Helpful by clicking Thumps Up if you like my post . Knowledge is Power & Sharing is Caring.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •