Thanks Thanks:  0
Showing results 1 to 2 of 2

Thread: Layered paging in idle mode

  1. #1
    VIP Member Reputation: 1017
    Join Date
    2014-03-10
    Posts
    547


    Post Layered paging in idle mode

    dear
    kindly find small description about Layered paging in idle mode,thanks
    Layered paging in idle mode which divide paging into two layers as follow:

    first layer:
    UE inform RNC by its last camped cell & its location saved in RNC Table where the information is valid during paging timer thus any incoming paging in idle mode will be directed towards

    the last camped UE's cell & its neighbors UE's cells else if timer expired then UE is subject to not accessing network anymore & hence paging in idle mode will go to the second layer(normal paging)

    second layer:
    it is the normal paging condition where incoming paging is directed to all the users in cells located in the same LAC.

    Capture.JPG


    Benefits : Layered Paging in Idle Mode reduces the Uu-interface paging load of UEs in idle mode. The reduced paging load is:

    -Inversely proportional to the average number of a cell's configured neighboring cells
    -Proportional to the number of configured cells in an LA or RA
    -Proportional to the first-layer paging success rate

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 490
    Join Date
    2008-08-14
    Posts
    2,940


    Default Re: Layered paging in idle mode

    Dears, did any one in the forum test this feature for Real Time services?
    as majority test it only for Non-Real time services

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •