Thanks Thanks:  0
Showing results 1 to 8 of 8

Thread: UE fails to receive RRC Release in 4G during CSFB

  1. #1
    Member Reputation: 83
    Join Date
    2009-12-06
    Posts
    149


    Default UE fails to receive RRC Release in 4G during CSFB

    Experts,

    During CSFB with RIM (SI tunneling) in Nokia equipment we often coming across situations where UE is not receiving RRC release message (which contains 3G SI). This results in long setup time because UE need to wait 10s to move itself to 3G to proceed with the call.

    Did anyone experience this problem?

    Thanks.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 60
    Join Date
    2011-12-05
    Posts
    32


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    -Check if it is isolated case or it involves more than 1 site or cluster
    -If it is more than 1 site, Check if TAC-LAC mapping is defined properly in CS CORE
    -Perform cell trace/tcp dump analysis... If traffic news is available it is much better for troubleshooting this type of scenario

    -mhelboy

    Quote Originally Posted by rosan View Post
    Experts,

    During CSFB with RIM (SI tunneling) in Nokia equipment we often coming across situations where UE is not receiving RRC release message (which contains 3G SI). This results in long setup time because UE need to wait 10s to move itself to 3G to proceed with the call.

    Did anyone experience this problem?

    Thanks.

  4. #3
    Member Reputation: 238
    Join Date
    2009-01-20
    Posts
    539


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    Hi

    is feature CSFB with PSHO enabled in network?

    Rgds
    Plannerguy

  5. #4
    Junior Member Reputation: 10
    Join Date
    2017-07-22
    Posts
    4


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    Hi,

    If PSHO is enabled,the RRC release are recieved in IUcs not in S1.

    BR

  6. #5
    Member Reputation: 18
    Join Date
    2010-03-18
    Posts
    66


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    Hi,

    Faced the same issue in our network, solved by reducing the number of 3G neighbors to be send in RIM SI request.

  7. #6
    Member Reputation: 119
    Join Date
    2008-09-18
    Posts
    249


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    thanks oucht79 for sharing ur experience. but i didnt understand why RIM SI request could involve more than one neighbor ! it should be just one (configured in blind CSFB) or the best neighbor (CSFB with measurements)

  8. #7
    Member Reputation: 69
    Join Date
    2013-04-05
    Posts
    111


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    Quote Originally Posted by eritelecom View Post
    thanks oucht79 for sharing ur experience. but i didnt understand why RIM SI request could involve more than one neighbor ! it should be just one (configured in blind CSFB) or the best neighbor (CSFB with measurements)
    Several cells with its SIB can be shared, not a single frequency as in regular CSFB.

  9. #8
    Member Reputation: 21
    Join Date
    2012-10-04
    Posts
    52


    Default Re: UE fails to receive RRC Release in 4G during CSFB

    Quote Originally Posted by rosan View Post
    Experts,

    During CSFB with RIM (SI tunneling) in Nokia equipment we often coming across situations where UE is not receiving RRC release message (which contains 3G SI). This results in long setup time because UE need to wait 10s to move itself to 3G to proceed with the call.

    Did anyone experience this problem?

    Thanks.
    During the RIM request is possible that eNB doesnt receive the info from UTRAN . So eNB will be waiting within the timer period only .

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •