Huawei RAN17.1 TCP Proxy feature Trial_3G network

[RF engineer]

Dears

Any trial from your side done on feature in Huawei RAN17.1 called "TCP Proxy" which tend to improve the latency and user speed.As couple of tests done to understand where have the improvement, and what till now concluded this feature looks improve the control plane latency.Many test done on Ookla,testmy which shows slight change while the measurement captured on WNG tool shows significant improvement .

BR

[justdream]

Great, could you please share more details or complete report

[kevin_h811]

Hi RF Engineer,

Do you have the script for this activity..

br//

[RF engineer]

Hi RF Engineer,

Do you have the script for this activity..

br//

Below is MML .

SET UL2RSVPARA: RSVSWITCH0=RESERVED_SWITCH_0_BIT9-1;SET URRCTRLSWITCH: PROCESSSWITCH5=TCP_PROXY_SWITCH-1;SET UDPUCFGDATA: RsvdSwitch2=RsvdSwitch2_Bit5-1;SET UDPUCFGDATA: RsvdPara3=16803036;SET UL2RSVPARA: RSVU32PARA2=64.

BR

[fahmi]

Below is MML .

SET UL2RSVPARA: RSVSWITCH0=RESERVED_SWITCH_0_BIT9-1;SET URRCTRLSWITCH: PROCESSSWITCH5=TCP_PROXY_SWITCH-1;SET UDPUCFGDATA: RsvdSwitch2=RsvdSwitch2_Bit5-1;SET UDPUCFGDATA: RsvdPara3=16803036;SET UL2RSVPARA: RSVU32PARA2=64.

BR

Dear
please to explain meaning of different reserved param:

SET UL2RSVPARA: RSVSWITCH0=RESERVED_SWITCH_0_BIT9-1;
SET UDPUCFGDATA: RsvdSwitch2=RsvdSwitch2_Bit5-1;
SET UDPUCFGDATA: RsvdPara3=16803036;
SET UL2RSVPARA: RSVU32PARA2=64.

And do you confirm throughput enhancement via Huawei KPIs ?

BR,

[jkpllan3]

Hi,

I'm going to test this feature in my network. After studying the description, I found some interesting counters; please let me know if the values of your network are like mine:
VS.PS.DLfirstPacket.RttDelay.Mean
KPIs.jpg

VS.PS.ULfirstPacket.RttDelay.Mean
KPIs2.jpg

To get the counters you must run first:
SET UDPUCFGDATA:OPTIMIZATIONSWITCH=UP_MAINT_STAT_COUNT_SWITCH-0;
SET UL2RSVPARA:RSVSWITCH0=RESERVED_SWITCH_0_BIT9-1;
SET UL2RSVPARA:RSVU8PARA5=10;
SET UDPUCFGDATA:OMSWITCH=TCPPROXY_OM_ENH_SWITCH-1;

[fahmi]

Dears,

After activating the feature, no remarkable improvement in HSDPA throughput or RTT delay.

Please to explain how to confirm measurement by other means

TCP Proxy.jpg

Thanks

[justdream]

as far as I know, improvement should be detected from Smart care SEQanalyst KQI - not form normal Radio KPI

[jkpllan3]

Hi justdream,

Did you check the requirements:
check_first.jpg

I my network the related counters:
Ratio of downlink TCP traffic in the initial transmission stage = VS.PS.TCP.InitStage.DLTraffic(BSC6900,BSC6910)/VS.PS.DLMeanThroughput.TCPTransfer.TotalBytes(BSC6900,BSC6910) x 100%


Ratio of initial downlink traffic over a TCP connection with an initial CWND size greater than 8 MSS = VS.PS.TCP.InitStage.DLTraffic.Cwnd.More8(BSC6900,BSC6910)/VS.PS.TCP.InitStage.DLTraffic(BSC6900,BSC6910) x 100%
2017-05-22_151849.jpg

Your network has way less delay than mine. What actions apart of this have you taken?

[justdream]

I didn't implement yet, still in study phase