Huawei RAN17.1 TCP Proxy feature Trial_3G network

[RF engineer]

Dear
please to explain meaning of different reserved param:

SET UL2RSVPARA: RSVSWITCH0=RESERVED_SWITCH_0_BIT9-1;
SET UDPUCFGDATA: RsvdSwitch2=RsvdSwitch2_Bit5-1;
SET UDPUCFGDATA: RsvdPara3=16803036;
SET UL2RSVPARA: RSVU32PARA2=64.

And do you confirm throughput enhancement via Huawei KPIs ?

BR,

Hi Fahmi

Throughput don't depend on Huawei KPI as it is average measurement per time, using WNG tool from ALU to measure user latency and throughput.

BR

[RF engineer]

Hi,

I'm going to test this feature in my network. After studying the description, I found some interesting counters; please let me know if the values of your network are like mine:
VS.PS.DLfirstPacket.RttDelay.Mean
Attachment 40483

VS.PS.ULfirstPacket.RttDelay.Mean
Attachment 40484

To get the counters you must run first:
SET UDPUCFGDATA:OPTIMIZATIONSWITCH=UP_MAINT_STAT_COUNT_SWITCH-0;
SET UL2RSVPARA:RSVSWITCH0=RESERVED_SWITCH_0_BIT9-1;
SET UL2RSVPARA:RSVU8PARA5=10;
SET UDPUCFGDATA:OMSWITCH=TCPPROXY_OM_ENH_SWITCH-1;

I didnot see this KPI because time granularity is not real KPI. this figure after activation the feature?
BR

[RF engineer]

Dears,

After activating the feature, no remarkable improvement in HSDPA throughput or RTT delay.

Please to explain how to confirm measurement by other means

Attachment 40490

Thanks

Well what in my mind that may help is in Tems instigation see the layer 3 message measure the time between RRC connection request to Activate PDP context .
BR

[jkpllan3]

Hi,

I'm still in the planning phase (my 3G network is RAN18).

I just showed my manager @RF engineer picture to catch his attention. In my network we have better throughput that the competition, however we are ~100ms up in terms of latency.

Right now latency is pretty much a trending topic

[justdream]

Hi Fahmi

Throughput don't depend on Huawei KPI as it is average measurement per time, using WNG tool from ALU to measure user latency and throughput.

BR

Hi Friend, is it possible to share this tool [WNG]

[RF engineer]

It is not tool , complete solution of probes , that why not sharing , use Wireshark to check your throughput and latency it probably give you infications.
BR