Hello my friends,
I use Atoll 3.3.2 and i can not Modify Electrical Tilt.
I read and do step by step like this thread: http://www.finetopix.com/showthread....t-in-Atoll-3-1
But i am not successful
Please help me.
Thanks
There are two ways to modify your electrical tilt:
1. paste [Antenna] REDTDisplay = 1 in Atoll.ini as from the thread you mentioned above.
2. Modify from the antenna pattern file
I tried 1 but not successful.
Can you show me more step 2???
Originally Posted by manu4ever
There are two ways to modify your electrical tilt:
1. paste [Antenna] REDTDisplay = 1 in Atoll.ini as from the thread you mentioned above.
2. Modify from the antenna pattern file
Good day! To change the electrical angle of the antenna selected sector, You need to create a folder of the Physical Antenna and make it a Patern for a specific antenna. After that, when the selected folder Physical Antenna - values of the electrical angle will be active.
I tried 1 but not successful.
Can you show me more step 2???
Dear kid1519
1. Let's try again. Copy the attatched file and paste in C:\Program Files\Forsk\Atoll and restart Atoll.
2. For example: you can create the e-tilt=1 pattern from e-tilt=0 pattern by shifting the value in vertical pattern
Pattern.jpg
It's not exact 100% but you can use it in case you don't have the e-tilt=1 pattern from the manufacturer.
Dear kid1519
1. Let's try again. Copy the attatched file and paste in C:\Program Files\Forsk\Atoll and restart Atoll.
2. For example: you can create the e-tilt=1 pattern from e-tilt=0 pattern by shifting the value in vertical pattern
Pattern.jpg
It's not exact 100% but you can use it in case you don't have the e-tilt=1 pattern from the manufacturer.
Bookmarks