Thanks Thanks:  4
Showing results 1 to 6 of 6

Thread: LTE TDD Cell with No User But UL PRB Usage = 11% !!

  1. #1
    Member Reputation: 50
    Join Date
    2011-02-03
    Posts
    375


    Default LTE TDD Cell with No User But UL PRB Usage = 11% !!

    Dear Experts

    I have many LTE TDD cells with no User and no Traffic but the UL PRB usage is around 11% !!

    Any explanation for this behaviour ?

    Used formula : {100}*([L.ChMeas.PRB.UL.Used.Avg]/[L.ChMeas.PRB.UL.Avail])

    Vendor Huawei

    DL PRB is about ~ 0.8%

    Thanks

  2. Thanks amirvahidi thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Member Reputation: 69
    Join Date
    2013-04-05
    Posts
    111


    Default Re: LTE TDD Cell with No User But UL PRB Usage = 11% !!

    Does this counters account for common/control channels? Such as, PUCCH and PRACH? If yes, this could be your answer.

  5. Thanks amirvahidi thanked for this post
  6. #3
    Member Reputation: 50
    Join Date
    2011-02-03
    Posts
    375


    Default Re: LTE TDD Cell with No User But UL PRB Usage = 11% !!

    Assume that is PUCCH usage. But in our case there is no user and no traffic for this TDD Cell but not the same for an FDD Cell with no traffic.

    Is calculating PRB Load for TDD diferrent from FDD ?

    Quote Originally Posted by marcengo View Post
    Does this counters account for common/control channels? Such as, PUCCH and PRACH? If yes, this could be your answer.

  7. Thanks amirvahidi thanked for this post
  8. #4
    Junior Member Reputation: 9
    Join Date
    2016-02-24
    Posts
    7


    Default Re: LTE TDD Cell with No User But UL PRB Usage = 11% !!

    How i get dump for LTE from Netact?

  9. #5
    Moderator Reputation: 473
    Join Date
    2009-05-02
    Location
    Nearby
    Posts
    1,237


    Default Re: LTE TDD Cell with No User But UL PRB Usage = 11% !!

    Quote Originally Posted by amirvahidi View Post
    How i get dump for LTE from Netact?
    Ask in Nokia forum plz

  10. #6
    Member Reputation: 69
    Join Date
    2013-04-05
    Posts
    111


    Default Re: LTE TDD Cell with No User But UL PRB Usage = 11% !!

    Quote Originally Posted by fahmi View Post
    Assume that is PUCCH usage. But in our case there is no user and no traffic for this TDD Cell but not the same for an FDD Cell with no traffic.

    Is calculating PRB Load for TDD diferrent from FDD ?
    I`d say it depends more if the vendor does PUCCH dynamic allocation or fixed. If it is fixed, you will always have some PRB load due to PUCCH and PRACH, regardless if there is or there is not users camped in the cell. Once again, depends on the counters you are looking at. Assume 50 PRBs (10MHz) and 6 PRBs for PUCCH, which is pretty common, you would get 12%, which is pretty close to what you are measuring.

  11. Thanks electron thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •