DC-HSDPA

[ergin]

Hi all.in our 3g network there are 3 carrier.DC hsdpa can be on f2 and f3.we set multicellgroup by these carriers.My question do we have to open dc hsdpa switch on f1 carrier aside f2 and f3.if yes why..Vendor is huawei

[justdream]

if DC already enabled on F2 & F3
Don't enable on F1, it has no meaning

[fahmi]

Activate MIMO PRIME SWITCH and configure F1, F2 and F3 to the ame MultiCellGroup and same DL Group. DC will be activated in all Cells randomly (F1,F2) or (F1,F3) or (F2,F3)

[justdream]

Activate MIMO PRIME SWITCH and configure F1, F2 and F3 to the ame MultiCellGroup and same DL Group. DC will be activated in all Cells randomly (F1,F2) or (F1,F3) or (F2,F3)

I think MIMO
need special license? Right !

[fahmi]

I think MIMO
need special license? Right !

Yes, License LQW9MIMOP01 MIMO Prime(per Cell) + switch MIMOPRIMESW

[agenov]

Hi,

What is the common between Mimo Prime switch and DC-HSDPA ? i dont see point to activate switch that is for MIMO mode while they have DC-HSDPA network.


@ergin,
if your carriers are cont. in the spectrum then activate everywhere DC and define them as groups as already mentioned .

br
alex

[fahmi]

Sorry guys,

MIMO Prime is for Power increase on F1, F2 and F3

For DC-HSDPA on F1, F2 and F3, it's about Flex DC feature.

[Arsham]

Dear ergin,

I had some situation befor.
I have activated the feature Flexible Dual Carrier HSDPA Function (per NodeB) and it's done☺
Try this it worked 100% I checked it.

[Niki0beas]

I am not quite sure about it.