-
Member
Reputation: 119
eNB config exchanget
Hi firends
Plz tell me how the eNB updates its configuration at its neighbors once it has any change on its config ?
for example after PCI change of one of its cells
plz share feature name if u know it
-
Post Thanks - 1 Thanks
-
2017-02-09 01:11 AM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1849
Re: eNB config exchanget
This is handled by the X2 eNB Configuration Update procedure. Have a look at 3GPP 46.423 section 8.3.5.
So if you change the PCI on a cell, the eNB will send an X2 CONFIGURATION UPDATE message to all it neighbour eNBs to inform them.
I don't work with Nokia equipment but typically this is part of basic functionality or it might be bundled with the ANR functionality.
-
Post Thanks - 1 Thanks
tpkj thanked for this post
-
Member
Reputation: 119
Re: eNB config exchanget
thx wolverine. i have cells with wrong neighbor configuration so i'm doubting of this feature works properly or not
Bookmarks