TEMS_UnFiltered_ServRxLevSub and TEMS_UnFiltered_ServRxLevFull?

[parto_tegal]

Hi Experts...
I have one TEMS log file (in FMT format) in the attachment, it is supposed to have the TEMS_UnFiltered_ServRxLevSub and TEMS_UnFiltered_ServRxLevFull parameter inside, to be displayed on Actix Analyzer (as on the picture).

Unfortunatelly I didn't get the same when opened using my license. Can somebody show me how to get this? Which license should I need to open this?

Your help will be highly appreciated....

Best regards,
parto_tegal

[cdmahn]

Hi bruv,

I've tried to open your log with Actix Analyzer with the newest version (thanks to lccengr and other uploading man).

Here are some points (noted on the attached figure):

- I didn't see information like you in "GSM group"
- Information of RxLev and RxQual are in "TEMS"
- These information are different from normal TEMS. I think that the RxLev information was in form of GSM RxLev (see ETSI specification GSM 05.08):

RXLEV 0 = less than -110 dBm + SCALE.
RXLEV 1 = -110 dBm + SCALE to -109 dBm + SCALE.
RXLEV 2 = -109 dBm + SCALE to -108 dBm + SCALE.
:
:
RXLEV 62 = -49 dBm + SCALE to -48 dBm + SCALE.
RXLEV 63 = greater than -48 dBm + SCALE.
where the 'SCALE' parameter is an offset with the default value 0 dB.

- I made my simple query to convert from GSM RxLev to TEMS RxLev and display the result in map. Please tell me if the result of RxLev is correct or not.

Thank you.

[radionet]

Sorry, i can't download your logfile, plz add approve for me or up link to rapid?