-
Senior Member
Reputation: 423
3G uplink interfernce
Dear Experts,
why uplink interfernce in 3G is more severe than DL interference?
-
2016-11-25 05:10 AM
# ADS
Circuit advertisement
-
Member
Reputation: 38
1 out of 1 members found this post helpful.
Re: 3G uplink interfernce
Dear,
UE has less output power compared to nodeb and think about the number of UE vs. nodeb's.. Less power level always prone to be interfered
-
1 out of 1 members found this post helpful.
Re: 3G uplink interfernce
UL is weaker in power & compared to DL.So the UL noise floor should be lower for the Node B to distinguish between the UE signal & Noise
-
1 out of 1 members found this post helpful.
Re: 3G uplink interfernce
Hi. I would say that UL is more interference impacted because of orthogonal codes in UL are not correlated 100%. The more lack of correlation in codes the more interference. This is not the same in DL where correlation is close to 100%. Bear in mind that, even if UE has less power, the DL and UL link budget has to be balanced.
This is my view.
-
Senior Member
Reputation: 423
Re: 3G uplink interfernce
Originally Posted by
Nyquist
Hi. I would say that UL is more interference impacted because of orthogonal codes in UL are not correlated 100%. The more lack of correlation in codes the more interference. This is not the same in DL where correlation is close to 100%. Bear in mind that, even if UE has less power, the DL and UL link budget has to be balanced.
This is my view.
I want to ask why orthogonality will be different in DL & UL while the same are used.
-
VIP Member
Reputation: 1791
2 out of 2 members found this post helpful.
Re: 3G uplink interfernce
Originally Posted by
islam wagih
I want to ask why orthogonality will be different in DL & UL while the same are used.
reason for this is as Nyquist already said UL SC codes are no as good in orthogonality as Downlink.
ok, see in this way.
for downlink, if you are at a point X in the field we usually see 3 or 4 cells it's easier to extract useful signal for the UE receiver because all 512 have 0 cross-correlations.
in uplink, look from nodeB receiver side it hears from 100's of UE's at the same time and the SC they use doesn't have 0 cross-correlation. that is why we say WCDMA us UL limited.
Auto_art Default PAS: london
pl rate threads for their usefulnes
share & care
-
Post Thanks - 1 Thanks
Bookmarks