Thanks Thanks:  14
Page 4 of 4 FirstFirst ... 234
Showing results 31 to 40 of 40

Thread: iBwave Design Release Notes 8.0.0.134

  1. #31
    VIP Member Reputation: 2418
    Join Date
    2009-10-01
    Posts
    1,480


    Default Re: iBwave Design Release Notes 8.0.0.134

    The iBwave Design Version 10.0.0.88 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs:

    • Supported frequency reuse architecture
    • Body loss modeling
    • Best server maps with 2nd, 3rd and 4th order
    • LTE handoff matrix
    • Supported LTE-LAA band
    • Additional data in antenna report
    • Version compatibility and upgrade
    • Enhanced wall appearance and material
    • Usability improvements

  2. Thanks billaugust thanked for this post
  3. #32
    VIP Member Reputation: 2418
    Join Date
    2009-10-01
    Posts
    1,480


    Default Re: iBwave Design Release Notes 8 0 0 134

    The following issues have been resolved in iBwave Design Version 10.0.1.92:

    • The Cost Details report does not apply the cost information set in part properties.
    • The application stops working under certain conditions when accessing Calibration/Txlds.
    • Changing from LTE-A to LTE keep carrier aggregation parameters.
    • Prediction is not calculated when RF power unit is set to WATT.
    • MIMO RSRP path 2 power is not converted when the RF power unit is changed.
    • Unable to import .DWG file.
    • Certain conditions with excluded areas not configured properly causes file corruption.
    • Deleting a small cell causes the application to stop working.
    • Unable to open automation tool configuration file that is created in version 10.
    • Fiber cable length is miscalculated in Fiber Link Budget report.
    • Application running on Windows 7, stopped working when accessing output maps configurations in project properties.
    • Exported plan images are misaligned when cropped.
    • Unable to modify or to save any material in DB Editor application.
    • The output map displayed on a floor plan is not always refreshed when another output map is selected.
    • The Compliance report is not always generated.
    • The body loss zone height is incorrect when inclined surface arrow points from right to left.
    • The Design revision option is no longer available when selecting Save to Server.
    • The iBwave Viewer cannot open mobile files previously saved to the Cloud.
    • Missing attachments in Error Reports.

  4. Thanks billaugust thanked for this post
  5. #33
    Moderator Reputation: 4294 kamy's Avatar
    Join Date
    2009-04-15
    Posts
    1,804


    Default Re: iBwave Design Release Notes 8 0 0 134

    hopefully we have the installer soon

    Quote Originally Posted by Roman99 View Post
    The following issues have been resolved in iBwave Design Version 10.0.1.92:

    • The Cost Details report does not apply the cost information set in part properties.
    • The application stops working under certain conditions when accessing Calibration/Txlds.
    • Changing from LTE-A to LTE keep carrier aggregation parameters.
    • Prediction is not calculated when RF power unit is set to WATT.
    • MIMO RSRP path 2 power is not converted when the RF power unit is changed.
    • Unable to import .DWG file.
    • Certain conditions with excluded areas not configured properly causes file corruption.
    • Deleting a small cell causes the application to stop working.
    • Unable to open automation tool configuration file that is created in version 10.
    • Fiber cable length is miscalculated in Fiber Link Budget report.
    • Application running on Windows 7, stopped working when accessing output maps configurations in project properties.
    • Exported plan images are misaligned when cropped.
    • Unable to modify or to save any material in DB Editor application.
    • The output map displayed on a floor plan is not always refreshed when another output map is selected.
    • The Compliance report is not always generated.
    • The body loss zone height is incorrect when inclined surface arrow points from right to left.
    • The Design revision option is no longer available when selecting Save to Server.
    • The iBwave Viewer cannot open mobile files previously saved to the Cloud.
    • Missing attachments in Error Reports.

  6. #34
    Member Reputation: 55
    Join Date
    2009-05-25
    Posts
    103


    Default Re: iBwave Design Release Notes 8.0.0.134

    hi congtrung, sis you get any response on this?

  7. #35
    VIP Member Reputation: 2418
    Join Date
    2009-10-01
    Posts
    1,480


    Default Re: iBwave Design Release Notes 8.0.0.134

    The following issues have been resolved in iBwave Design Version 10.0.2.098:

    • Survey data contains incorrect Datetime format.
    • Service groups are reset once components are deleted.
    • A Unity project with an empty currency causes a Design project failure.
    • Layout plans exported to images are misaligned.
    • Duplicating a transceiver does not duplicate the properties of its sources.
    • Images on floor plans are misaligned after exporting to image or .PDF format.
    • Add a button to give users the option to open a folder containing project settings.
    • PCC configuration is not set when an LTE-A radio head with PCC configuration is dropped on design plans.
    • The prediction map is misaligned in the Output map report and when exporting the map to an image on a floor plan.
    • Prediction results are not displayed at the right height in 3D viewer.
    • The atrium hole on a horizontal or inclined surface remains in place even when the surface is moved or rotated around the floor plan.
    • The Reset license button is mistaken for the OK button and must be moved.
    • The PCC setting is not configured by default, preventing users to run LAA maximum throughput map.
    • The LTE RSRQ and LTE Total Received Power maps do not consider assigned channels.
    • Incorrect capacity results are calculated for WCDMA.

  8. #36
    VIP Member Reputation: 2418
    Join Date
    2009-10-01
    Posts
    1,480


    Default Re: iBwave Design Release Notes 8.0.0.134

    The following issues have been resolved in iBwave Design Version 10.0.3.102:

    • File type in file name must be generic across iBwave desktop applications.
    • Cable takes a long route to connect parts across floors through Vias.
    • It should not be possible to connect to a single connector twice.
    • A fiber connector mismatch warning is erroneously triggered for correctly configured connectors.
    • Power sharing is not properly calculated in version 10, but perfectly working in version 9.
    • Copying and Pasting racks/sub racks with modules does not properly duplicate the exact number of modules.
    • Vias connecting two components on separate floors are placed outside the layout plans.
    • The DB Editor is not able to connect to Unity server with Proxy settings.
    • Layer position is not maintained after copy-and-paste components.
    • The exclusion area property is not duplicated after copy-and-paste.
    • Capacity calculations are not correct for WCDMA.
    • When considering interfering sector in SNIR map, the prediction on inclined surfaces is not affected.
    • The application stops working when deleting plans in a project.
    • The capacity results are not consistent with the capacity values in the MADR legend.
    • The Zendesk chat widget is blank.

  9. #37
    Junior Member Reputation: 10
    Join Date
    2010-07-07
    Posts
    6


    Default Re: iBwave Design Release Notes 8.0.0.134

    hi mate, i would train a bit for indoor 3g 4g . do you think ibwave is the right tool?in case is there any installer available and med? no need last version as it is for training.best

  10. #38
    Junior Member Reputation: 10
    Join Date
    2010-07-07
    Posts
    6


    Default Re: iBwave Design Release Notes 8.0.0.134

    any way to get the serial? pm?

  11. #39
    VIP Member Reputation: 2418
    Join Date
    2009-10-01
    Posts
    1,480


    Default Re: iBwave Design Release Notes 8.0.0.134

    The following issues have been resolved in iBwave Design Version 10.1.0.108:

    • Surveys should only consider heights of prediction areas.
    • Prediction results are not displayed at the correct height in 3D viewer.
    • Updating the Inventory # with a string yields a NaN in Part Properties.

  12. #40
    VIP Member Reputation: 2418
    Join Date
    2009-10-01
    Posts
    1,480


    Default Re: iBwave Design Release Notes 8.0.0.134

    The following issues have been resolved in iBwave Design Version 10.1.1.114:

    • Selecting parts in Design Plans causes the 'Floor' combo box to display a null value.
    • The application closes unexpectedly when attempting to open a project with Corning fiber cables.
    • Custom cable IDs are incorrect in Link Budget Report.
    • 5GHz-LTE-LAA band 46 should be sub-divided to band 252, 255.
    • Moving the mouse across a Floor Plan can cause a lost image and as a result the application stops working.
    • Enhanced feature: Include Picture Plans and Design Plans in the Annotation Report.
    • Custom cable IDs are incorrect in Cable Routing Report.
    • The application stops working when attempting to delete a picture plan.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •