We don't expect any different respect on the coverage due the coverage is relative with the frequency band. The only difference 1.4 and 10MHz is the difference of carriers or Resource Blocks
If you want to increase coverage you can use Power Boosting in the Reference Signals. I recommend to use CFI in a dinamic way to avoid bottleneck in the control resource
coverage will remain the same if you maintain same power spectral density, say for 5MHz bw you use 40w radio then to keep same PSD you have to use 80W for 10MHz. provided that both the BWs are in the same freq band.
coverage will remain the same if you maintain same power spectral density, say for 5MHz bw you use 40w radio then to keep same PSD you have to use 80W for 10MHz. provided that both the BWs are in the same freq band.
Correct. In case you increase your BW, you will need aswell to increase your Power, else you will lose some coverage.
RS Power Boosing is not a real option in case a MNO decides to increase the available BW.
Bookmarks