-
Senior Member
Reputation: 372
1 out of 1 members found this post helpful.
MML Commands to Multiple NE
Hi friends,
I have got a recommendation script from OMStar with this format:
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=3,CellId=11782; {L030X}
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=5,CellId=5832; {L060X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=5,CellId=5832; {L060X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=5,CellId=5832; {L061X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=5,CellId=5832; {L061X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=5,CellId=5832; {L062X}
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=5,CellId=5832; {L062X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=4,CellId=12693; {L095X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=4,CellId=223; {L095X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=3,CellId=11782; {L095X}
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=4,CellId=12693; {L095X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=4,CellId=12693; {L095X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=3,CellId=11782; {L096X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=4,CellId=222; {L104X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=4,CellId=11751; {L104X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=3,CellId=4882; {L104X}
RMV UTRANNCELLocalCellId=1,Mcc="XXX",Mnc="01",RncId=3,CellId=3023; {L104X}
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=4,CellId=222; {L104X}
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=4,CellId=11751; {L104X}
RMV UTRANNCELLocalCellId=2,Mcc="XXX",Mnc="01",RncId=3,CellId=4882; {L104X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=4,CellId=222; {L104X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=4,CellId=11751; {L104X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=3,CellId=3432; {L186X}
RMV UTRANNCELLocalCellId=3,Mcc="XXX",Mnc="01",RncId=6,CellId=2501; {L205N}
I know I can run each command in each element one a time, but this is troublesome when you got to run commands in more than 20 NE.
I also know how to create a planned area, download a RNP file, do the modificacions, upload the modded file and then export the incremental scripts on CME so it generates the same scripts and send them through the script executor.
But frankly, I believe there should be another way more convenient to do this. So after this long introduction here is my question:
How is it possible to specify in the task manager in which element some lines of code should be executed?
2016-08-25_180600.jpg
-
2016-08-26 07:08 AM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 360
Re: MML Commands to Multiple NE
Hi,
whats is the problem if your run more than 20NE?
Best people are those who are useful to others
-
Senior Member
Reputation: 372
Re: MML Commands to Multiple NE
The changes are not the same for each NE (in this case add or delete a neighbor for enodeB) and I already have the mml command I want to run in each case. I said 20 as an example, but what if the case were 200?
-
Senior Member
Reputation: 360
Re: MML Commands to Multiple NE
1. The changes are not the same for each NE
-> creating script from excel and using formula to generate the script. i am using that way
2. I already have the mml command I want to run in each case
-> probably you can parse your script by excel formula to filtering your necessary line
Best people are those who are useful to others
-
Senior Member
Reputation: 372
Re: MML Commands to Multiple NE
Thanks for youre responses yoyokdp, but what you describe is what I would usually do.
Is it possible to instruct U2000 something like this?
//For enodeB1 run this
[Do something]
//For enodeB2 run this
[Do something else]
...
//For enodeB9999
[Do something else]
-
Senior Member
Reputation: 360
Best people are those who are useful to others
-
Senior Member
Reputation: 372
Re: MML Commands to Multiple NE
Hi friends,
I found the solution I was looking for:
Prepare the mml script you want to run with the following format:
LST CELL:;{NE Name1}
DSP CELL:;{NE Name2}
Note that it can be any command, not just list or display. Curly brackets are needed and you should use the NE name as appears in U2000/M2000.
Then go to U2000 menu bar and navigate to Maintenance -> Task Management, select MMlL Script Task, upload your mml script (don't select any NE, as this info is already in the file).
In this way every line of the mml script should end with {NE Name} and will run in the specified NE.
-
Post Thanks - 2 Thanks
-
Senior Member
Reputation: 360
Re: MML Commands to Multiple NE
Originally Posted by
jkpllan3
Hi friends,
I found the solution I was looking for:
Prepare the mml script you want to run with the following format:
LST CELL:;{NE Name1}
DSP CELL:;{NE Name2}
Note that it can be any command, not just list or display. Curly brackets are needed and you should use the NE name as appears in U2000/M2000.
Then go to U2000 menu bar and navigate to Maintenance -> Task Management, select MMlL Script Task, upload your mml script (don't select any NE, as this info is already in the file).
In this way every line of the mml script should end with {NE Name} and will run in the specified NE.
Yeap.. like what i mentioned before, we can create formula in excel file
Originally Posted by
yoyokdp
same like previous methode.... i separate the group of command by each text file
Best people are those who are useful to others
-
Post Thanks - 1 Thanks
-
Member
Reputation: 30
Re: MML Commands to Multiple NE
1. Use CME
2. Use Batch mode
for removing all neighbors (SW must be >eRAN 8.1 ) use this
RMV EUTRANINTRAFREQNCELL:;
RMV EUTRANINTERFREQNCELL:;
RMV EUTRANEXTERNALCELL:;
RMV UTRANNCELL:;
RMV UTRANEXTERNALCELL:;
RMV GERANNCELL:;
RMV GERANEXTERNALCELL:;
-
Member
Reputation: 83
Re: MML Commands to Multiple NE
Bookmarks