-
Member
Reputation: 83
ActivationTimeOffset E*******
Hi Experts,
What is the E******* default for activation time offset for CS RAB Setup?
Thanks
rosan
-
2016-06-20 08:40 PM
# ADS
Circuit advertisement
-
Junior Member
Reputation: 11
Re: ActivationTimeOffset E*******
Hi, do you mean the ATO parameter value, which is added to the calculated activation time offset?
-
Re: ActivationTimeOffset E*******
Originally Posted by
rosan
Hi Experts,
What is the E******* default for activation time offset for CS RAB Setup?
Thanks
rosan
Hi,
Probably you are talking about cfnOffsetMargin value . Default value is 40 but best practice shows 80 is optimal value. Any further clarification let me know
Cheers
-
Member
Reputation: 83
Re: ActivationTimeOffset E*******
Originally Posted by
webkasperl
Hi, do you mean the ATO parameter value, which is added to the calculated activation time offset?
Yes. The configured parameter value and the calculation of activationtime sent in L3.
rosan
-
Member
Reputation: 95
Re: ActivationTimeOffset E*******
Originally Posted by
electron
Hi,
Probably you are talking about cfnOffsetMargin value . Default value is 40 but best practice shows 80 is optimal value. Any further clarification let me know
Cheers
we see a large degradation in RAB setup delay (50%) after chabging from 40 to 80 what do you think @electron
-
Junior Member
Reputation: 11
1 out of 1 members found this post helpful.
Re: ActivationTimeOffset E*******
That is the tradeoff you have to take into account. Either good RAB establishment success rate due to allowing more RLC PDU retransmissions of the RRC RADIO BEARER SETUP message or faster RAB establishment with the risk, that the UE was not yet ready at the activation time, because it did not yet get all RLC PDUs of the RRC RB SETUP message in bad radio conditions.
For customers the 40 x 10ms = 400 ms additional call setup time will not be bad. It is just a topic, if you have to be fast for some benchmark tests ...
-
Post Thanks - 1 Thanks
Bookmarks