Thanks Thanks:  2
Showing results 1 to 6 of 6

Thread: IFHO and ISHO Compressed Mode

  1. #1
    Member Reputation: 22
    Join Date
    2012-01-20
    Posts
    53


    Default IFHO and ISHO Compressed Mode

    Hi,

    the event 1f triggers the IFHO and ISHO as you know. and normally, the UE will measure the IFHO before the ISHO (by receiving the measurement control from RNC containing the neighbors list). But in many cases, the UE measure the IS neighbors only !!
    In which cases, the UE do this action ?

    Br,

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 22
    Join Date
    2012-01-20
    Posts
    53


    Default Re: IFHO and ISHO Compressed Mode

    Please to help.

    BR,

  4. #3
    Senior Member Reputation: 608
    Join Date
    2010-10-08
    Posts
    443


    1 out of 1 members found this post helpful.

    Default Re: IFHO and ISHO Compressed Mode

    Go through the following slide if your vendor is E*R*I*C*S**N

    http://www.slideshare.net/Bamidele20...andover-basics

    And check for the params from slide 6.

    You may go through following link for ideas in IRAT HO in UMTS

    http://www.sharetechnote.com/html/Ha...essedMode.html
    ftp://vanwinkle.org/Rene/Day1/Handover.ppt
    http://www.e*******.com/in/res/thecompany/docs/publications/e*******_review/2003/2003011.pdf
    Last edited by techfolkcmr; 2016-05-04 at 02:07 AM
    Please add reputation by clicking * at left bottom of post & Hit Thanks and report Helpful by clicking Thumps Up if you like my post . Knowledge is Power & Sharing is Caring.

  5. Thanks SRRFWIRELESS7 thanked for this post
  6. #4
    Member Reputation: 119
    Join Date
    2008-09-18
    Posts
    249


    Default Re: IFHO and ISHO Compressed Mode

    check core configuration regarding WCDMA/GSM searching priorities

  7. #5
    Member Reputation: 69
    Join Date
    2013-04-05
    Posts
    111


    Default Re: IFHO and ISHO Compressed Mode

    Lets start from the bottom: the event used to start/stop CM differs among the vendors. ERI and HUA use 2D/2F. NOK as you are mentioning, then yes, 1E and 1F.

    For ERI you also need to configure the hoType parameter, which will control the type of CM/Handover to be triggered.

    For NOK you need to check which profile is actually set, tables HOPx/FCMx are how you manage everything. Depending on what is mapped and what is set, you may have the IFHO or ISHO disabled. I would start with that!

    BR!

  8. Thanks techfolkcmr thanked for this post
  9. #6
    Member Reputation: 567
    Join Date
    2011-06-17
    Posts
    252


    Default Re: IFHO and ISHO Compressed Mode

    Hi friend
    - Maybe the cell not have inter frequency Neighbor.
    - Check the FMCI that the cell assigned. Maybe it disabled IFHO
    dtvt2
    Pass: finetopix

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •