Which is the paramter on Nokia OSS?

[hieuphong]

Hi guys,

PsInactTmrForPreFstDrm is the RNC parameters on R15 Huawei. Do you know which is the paramter on Nokia vendor that it's similar with this parameter?

PsInactTmrForPreFstDrm: This parameter specifies the value of the CELL-PCH inactivity timer for UEs enabled with the Fast Dormancy feature. When detecting that the Fast Dormancy User in PS domain had no data to transfer in CELL-PCH for a long time which longer than this timer, the UE is released. To enable this timer, set this timer to a value other than 0.

Thanks!

[fenixchoo]

MSActivitySupervision (WAC) for SW Release RU40 and above

The MSActivitySupervision timer is used in the RRC states CELL_PCH and URA_PCH for supervising the inactivity of NRT RAB(s).
The timer starts when a state transition to either state is executed. The MSActivitySupervision timer stops when any activity of NRT RAB(s) is detected and the MS is moved to the CELL_FACH or CELL_DCH state.
The timer restarts (from the initial value) when the inactivity of the NRT RAB(s) is detected and the MS is moved back to the CELL_PCH or URA_PCH state again. In the expiration of the MSActivitySupervision timer, when the first "inactive state indication" (that is, cell/URA update which does not cause the (re)initiation of the signalling or data flow) is received from the MS, the RNC asks SGSN to release the Iu connection.

Value : 0...1440 min, step 1 min

Note: If the parameter value is set to zero, the state transition to CELL_PCH/URA_PCH is not allowed.
When inactivity is detected in the CELL_FACH state, the MS is switched to the idle mode.