Missing Neighbor

[don_hardiawan]

Thanks my dear friend,

Is there a tool to check the relation between Sites and neighbors?
I heard about MCOM, or there is better tool????

Please advice

dear friend,...
i think you can use tools same/release in your vendor. if you using e// it's better using mcom but if you using huawei you can use Nastar. the spesific vendor tools give easier mapping from database bsc parameter to mapping tools.... what your vendor equipment?

[salamanda1969]

After applying the procedure suggested by gprastomo,
dont forget to drive test and verify actual performance.

Sometimes, 3 or more tier neighbours have to be added (to minimise drop calls) depending on the site density, tall overshooting sites, hilly terrain, etc.
Cell-pair adjacency report and drive test data are complementary.
Hope that helps.

[ryu_zab]

@Satya,

Can you send the cell ref. file for ACTIX

[ryu_zab]

engg.satya @ attached is the cellref.

Hello Amin, I am unable to open the cellref. file. Kinldy can you please resend it as I need it urgently. Thanks in advance

[rohit.jain482]

Thanks my dear friend,

Is there a tool to check the relation between Sites and neighbors?
I heard about MCOM, or there is better tool????

Please advice

MCOM tool shows the relation between a cell and also shows it neighbors. If some cell has to be defined as neighbor but is not then it can be checked or identified in MCOM. But ultimately the decision is in the hands of the optimization engineer whether or not to include a certain cell as a neighbor. However MCOM can be used for any vendor's n/w. There are vendor specific tools for checking neighbors. Some also predict neighbors to be defined. But usually the neighbros suggested by tools are not very good. Also they require specific formats of inputs which can be possible only provided vendor of n/w is the owner of the tool.

[aminkhan]

Hello Amin, I am unable to open the cellref. file. Kinldy can you please resend it as I need it urgently. Thanks in advance

Dear,
Attached is the cellref , inform me if you can download it.

regards
Amin

[sonerss]

Hi thuti

Maybe below link can help you

http://www.finetopix.com/actix/15932...hbur-list.html

How to create Cellrefs.txt. Anyone can help me? Thanks

[iamsasuke]

hi,

For e/// network, you can record NCS to see specific neighbors to be defined.
After 1 week or so, use handover statistics to see w/c neighbos to delete.
Just make sure you define all MF's of the neighbors you added..

[dNoB]

This si a good read.

[wireless_houss]

You can you MIPT and the attach is the in put files and mipt

hi please can you share the attached file on 4share or something like it