Thanks Thanks:  7
Showing results 1 to 8 of 8

Thread: Feature - Narrowband Interference Suppression

  1. #1
    Member Reputation: 41
    Join Date
    2012-01-31
    Posts
    8


    1 out of 1 members found this post helpful.

    Default Feature - Narrowband Interference Suppression

    In my country, one operator have successfully implement 3G U900 (900Mhz), but we found some cells have high RTWP not because of external interference.
    After some investigation we found high RTWP due to Narrowband. Huawei have solution to reduce RTWP by implement Feature Narrowband Interference Suppression..
    Attached Files Attached Files

  2. Thanks tpkj, Cepillo, justdream, lteexpert, paulus, Stantheman, f1cy thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Senior Member Reputation: 502
    Join Date
    2008-11-05
    Posts
    1,025


    Default Re: Feature - Narrowband Interference Suppression

    Dear

    Can you share the document again, attach have problem .

    BR
    RF engineer

  5. #3
    Senior Member Reputation: 490
    Join Date
    2008-08-14
    Posts
    2,940


    Default Re: Feature - Narrowband Interference Suppression

    Please re-upload, file has error
    and kindly could you share KPIs result after implementation

  6. #4
    Member Reputation: 22
    Join Date
    2012-01-20
    Posts
    53


    Default Re: Feature - Narrowband Interference Suppression

    is there similar feature for NSN

  7. #5
    Member Reputation: 25
    Join Date
    2010-08-03
    Posts
    116


    Default Re: Feature - Narrowband Interference Suppression

    HELLO:
    if you have to use the NBIS is because you have external interference or intermodulation, the NBIS is a temporal solution only used during the time you are working in the problem.
    The activation of the NBIS affect traffic, of course if you have interference it helps and it improve everything but it isnt a permanent solution. Im in Denmark and we have interference problems everyday, comming from HW problems in the site, cable, connectors, antenna..etc. comming from external devices like ship radio repeaters, faulty TV amplifiers..etc. The activation of the NBIS is the last choice when you cant suppress the interference.

  8. #6
    Member Reputation: 209
    Join Date
    2011-05-11
    Location
    Germany
    Posts
    70


    Default Re: Feature - Narrowband Interference Suppression

    I got error when i tried to open pdf file. Could you please check?
    Thanks.

  9. #7
    Member Reputation: 164
    Join Date
    2012-03-20
    Posts
    148


    Default Re: Feature - Narrowband Interference Suppression

    Hi,

    The file is damaged, Please re-upload again.

    Thanks
    BR//Paul

  10. #8
    Junior Member Reputation: 10
    Join Date
    2016-10-18
    Posts
    3


    Default Re: Feature - Narrowband Interference Suppression

    Hi all,
    Is there any similat feature in NSN , to reduce interference. Could you also recommend when we increase u900 power from 40 w to 60 w to enhance throughput: is it better to keep the same CPICH or to increase it ?
    Please advise.
    thanks a lot

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •