Thanks Thanks:  31
Page 1 of 7 123 ... LastLast
Showing results 1 to 10 of 69

Thread: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)

  1. #1
    Member Reputation: 83
    Join Date
    2010-05-09
    Posts
    144


    2 out of 2 members found this post helpful.

    Default OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)

    1.install OMStar in C:
    http://www.4shared.com/zip/QLYAjvC5c...PC100_x64.html


    2.change MAC address of first priority NIC to match the following :0026C64B29AD . after changing MAC address ,if you open the program from "C:\Huawei\GENEX\OMStarV500R011\StartUp.exe" your Esn should be changed to :190392876541440


    3.paste and replace the attached files authentication.dll and authentication.jar in directory "C:\Huawei\GENEX\OMStarV500R011\lib":
    http://www.4shared.com/rar/1K4FRL9bc...ntication.html


    4.open the program from "C:\Huawei\GENEX\OMStarV500R011\StartUp.exe" not from "C:\Huawei\GENEX\OMStarV500R011\OMStar.exe" and load the following License:


    //////////////////////////////////////////////////
    [LicenseInfo]
    ESNSerial=5234315634184484229
    Product=OMStar
    ProductName=License Code.lic
    Mark=5322695790861535658
    LastUseData=5322695790861535658
    Sign=15842662712764793062
    Function=all
    ValidityData=1679552251831948224
    /////////////////////////////////////////////////


    thanks to friend experthuawei for sharing the license of this Esn i think it is active for the next 6 months

    New Features in R011 compared to R010
    1. VoLTE Subjects Manager.
    2. GSM Signaling Browsing, UMTS Signaling Browsing, GSM CHR Browsing, UMTS CHR Browsing.
    3. UMTS\LTE Antenna Reverse Dectection.
    4. GSM Refarming Interference Analysis.
    5. LTE U2000 user-defined templates import.


    Performance Optimization
    LTE: LTE Config Parameters Check and LTE Neighboring Cell Check support checking a maximum of 8,000 sites.
    GSM\UMTS: The traffic statistics import, KPI Analysis, Neighboring Cell Analysis, and multi-NE analysis efficiency has seen linear growth.


    Function Enhancement
    1. The topology-based missed neighboring cell checks of the GSM, UMTS, and LTE networks are added to the Neighboring Cell Check feature. The UMTS and LTE networks support the missed neighboring cell check based on handover traffic statistics. The UMTS network supports the Intra-frequency neighboring cell check based on PCHRs. The Neighboring Cell Check feature allows users to set the neighboring cell frequency policy and the blacklist and whitelist. It also supports filtering based on the frequency policy and blacklist and whitelist.
    2. The GIS feature supports independent display of the GIS map. It also supports geographic observation of parameters based on the imported engineering parameters and of the neighbor relationships based on the imported configuration data.
    3. The LTE Troubleshooting feature is adapted to the algorithms of eRAN7.0 and eRAN8.0.
    4. OMStar V500R011 is adapted to SRAN10.1 (GSM and UMTS: BSC6900 and BSC6910) and eRAN8.1 (LTE).
    5. OMStar V500R011 supports GBSS14.0 (GSM) and RAN14.0 (UMTS) and later versions. The GSM ONLY options for GSM configuration data and traffic statistics import are deleted and the BSC can be automatically matched.
    6. GUL interoperability parameter check supports related parameter check of LTE Handover.
    7. LTE FDD uplink interference detection and recognition supports LTE Inter-RAT Interference Identification.
    ----------
    Skype id:mohyedeen.alkousy
    Last edited by mashi123; 2015-12-16 at 08:32 PM

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 21
    Join Date
    2015-06-19
    Posts
    5


    Default Re: OMStar R011 Installation and L.i.c workaround

    thanks man. i will proceed and give you feedback

  4. #3
    Member Reputation: 419
    Join Date
    2010-04-21
    Posts
    536


    Default Re: OMStar R011 Installation and L.i.c workaround

    Hello,
    Thanks a lot, Do you have newer release? R011 is a little old.

  5. #4
    Member Reputation: 83
    Join Date
    2010-05-09
    Posts
    144


    1 out of 1 members found this post helpful.

    Default Re: OMStar R011 Installation and L.i.c workaround

    Dear beniy
    This release is july 2015 . How could that be old . There is no newer release

  6. Thanks beniy thanked for this post
  7. #5
    Member Reputation: 83
    Join Date
    2010-05-09
    Posts
    144


    Default Re: OMStar R011 Installation and L.i.c workaround

    this installation support RAN 17.1

  8. #6
    Member Reputation: 83
    Join Date
    2010-05-09
    Posts
    144


    1 out of 1 members found this post helpful.

    Default Re: OMStar R011 Installation and L.i.c workaround

    OMStar_V500R011_GSM_Data_Collection_Guide
    http://www.4shared.com/zip/3PKoEMMob...ata_Colle.html

    OMStar_V500R011_LTE_Data_Collection_Guide
    http://www.4shared.com/zip/9YSQGKnVb...ata_Colle.html

    OMStar_V500R011_UMTS_Data_Collection_Guide
    http://www.4shared.com/zip/y5QZa0pNc...Data_Coll.html

  9. Thanks loihut, jkpllan3, SRRFWIRELESS7, lteexpert thanked for this post
  10. #7
    Member Reputation: 402
    Join Date
    2010-08-18
    Posts
    257


    Default Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)

    Hi mashi123

    I have applied step 1: 1.install OMStar in C:, however, Steps 2: -> 4: fail due to the fact i'm unable to apply: 'MAC address of first priority NIC to match the
    following :0026C64B29AD' to correct interface and complete all steps. When starting OMStar application my ESN: does not match as shown on instructions.

    Could you help:

    Thanks Jesterbean

    2.change MAC address of first priority NIC to match the following :0026C64B29AD . after changing MAC address ,if you open the program from "C:\Huawei\GENEX\OMStarV500R011\StartUp.exe" your Esn should be changed to :190392876541440


    3.paste and replace the attached files authentication.dll and authentication.jar in directory "C:\Huawei\GENEX\OMStarV500R011\lib":
    http://www.4shared.com/rar/1K4FRL9bc...ntication.html


    4.open the program from "C:\Huawei\GENEX\OMStarV500R011\StartUp.exe" not from "C:\Huawei\GENEX\OMStarV500R011\OMStar.exe" and load the following License:


    //////////////////////////////////////////////////
    [LicenseInfo]
    ESNSerial=5234315634184484229
    Product=OMStar
    ProductName=License Code.lic
    Mark=5322695790861535658
    LastUseData=5322695790861535658
    Sign=15842662712764793062
    Function=all
    ValidityData=1679552251831948224
    /////////////////////////////////////////////////

  11. #8
    Member Reputation: 402
    Join Date
    2010-08-18
    Posts
    257


    Default Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)

    Hi mashi123 & Huawei Expert,

    Can you Please provide license for ESN: 4324127772812245
    GENEX_OMStar_V500R011C00SPC100

    Regards,
    Jesterbean

  12. #9
    Member Reputation: 34
    Join Date
    2007-04-02
    Location
    CHINA
    Posts
    209


    Default Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)

    there is no need to change so many things,just modify authentication.dll is enough. By the way,demo.jpgthe expire time can also be changed in this file,too.

  13. #10
    Member Reputation: 83
    Join Date
    2010-05-09
    Posts
    144


    Default Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)

    how to change MAC address :
    1.in cmd put the command ipconfig /all
    it will show you all the local network connections you have arranged according to their priority .then apply the steps mentioned in the below link on the first one in the list
    http://www.online-tech-tips.com/comp...e-mac-address/

  14. Thanks justdream thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •