Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)
Originally Posted by mashi123
dear dacoder
usually omstar will use the mac address to generate the esn if it has no administrative rights to access the following registry path :
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}]
or it has no administrative rights to access the HDD serial number which come with storage_disk_descriptive
so i guess you need to install omstar as normal user to force it to use mac address and also later u need to run it as normal user
of course all of this is not needed if you manage to get OMStar 10 license for your original esn from the forum
there is a compatibility tool from Microsoft which force specific program to run as normal user.
Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)
Originally Posted by 流星1978
when open the soft to display the screen to ask license,open od to attach the thread,set breakpoint.then go on, press f7 or f8 to step into/over,the left time is display in eax whick is hex ,change this hex to any number you like.Good Luck!
Re: OMStar R011 Installation and L.i.c workaround (Support till RAN 17.1)
Originally Posted by 流星1978
when open the soft to display the screen to ask license,open od to attach the thread,set breakpoint.then go on, press f7 or f8 to step into/over,the left time is display in eax whick is hex ,change this hex to any number you like.Good Luck!
Franckly I don't understand ; can you explain by snapshot Thanks
Bookmarks