-
Senior Member
Reputation: 322
Improve HDSPA throughput
Dears I have a network with below parameter
Huawei RAN14
Allocate Code Mode
Automatic
Code Max Number for HS-PDSCH
15
Code Min Number for HS-PDSCH
1
Code # for HS-SCCH
4
The Offset of HSPA Total Power
0
HS-PDSCH MPO Constant
2.5DB
HARQ Preamble Capability Indication Mode0
Code Adjust Switch for HSDPA
ON
User Number for Code Adjust for HSDPA
3
Punish Timer Length for Code Adjust for HSDPA
5
Dynamic HS-SCCH SC Allocation Switch
OFF & On
And having below Mac-hs Chart
Untitled.jpg
Appreciate if I can have some ideas for improving the throughput
Thanks!
Khaldounh
-
Post Thanks - 1 Thanks
-
2015-09-11 07:12 AM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 609
Re: Improve HDSPA throughput
Hi friend,
Login to NodeB and type LST MACHSPARA and post the values. The values you provided are default values of CELL HSDPA and needs little optimisation like Setting No. of codes for HS-SCCH from 4 to 3, HS-PDSCH Constant from 2.5db to 0 (or) 5 but we have tried and didnt get any specific improvements.
Please add reputation by clicking * at left bottom of post & Hit Thanks and report Helpful by clicking Thumps Up if you like my post . Knowledge is Power & Sharing is Caring.
-
Post Thanks - 2 Thanks
-
Senior Member
Reputation: 322
Re: Improve HDSPA throughput
As you can see from above, our network almost in a default stat, that's why I need some ideas to improve it accordingly!
Thanks
Khaldounh
Originally Posted by
techfolkcmr
Hi friend,
Login to NodeB and type LST MACHSPARA and post the values. The values you provided are default values of CELL HSDPA and needs little optimisation like Setting No. of codes for HS-SCCH from 4 to 3, HS-PDSCH Constant from 2.5db to 0 (or) 5 but we have tried and didnt get any specific improvements.
-
Senior Member
Reputation: 491
Re: Improve HDSPA throughput
Originally Posted by
techfolkcmr
Hi friend,
Login to NodeB and type LST MACHSPARA and post the values. The values you provided are default values of CELL HSDPA and needs little optimisation like Setting No. of codes for HS-SCCH from 4 to 3, HS-PDSCH Constant from 2.5db to 0 (or) 5 but we have tried and didnt get any specific improvements.
Dear,
what's the idea behind changing MPO Constant!
-
Senior Member
Reputation: 322
Re: Improve HDSPA throughput
Dears
the issue is we have only 12000 Subscriber in the network, how we can expand the user number, and what are the limitation for number of user ????
Thanks
Khaldounh
Originally Posted by
techfolkcmr
Hi friend,
Login to NodeB and type LST MACHSPARA and post the values. The values you provided are default values of CELL HSDPA and needs little optimisation like Setting No. of codes for HS-SCCH from 4 to 3, HS-PDSCH Constant from 2.5db to 0 (or) 5 but we have tried and didnt get any specific improvements.
-
Member
Reputation: 28
Re: Improve HDSPA throughput
Dear MPO constant is to adjust CQI. Ue report CQI after that NodeB calculate adjusted CQI in which MPO constant is used. If you decrese MPO constant then CQI has have higher value. If you increase MPO constant CQI becomes lower. Because CQI is the main thing to allocated modulation scheme and TB size so it will impact throughput.
Originally Posted by
justdream
Dear,
what's the idea behind changing MPO Constant!
-
Post Thanks - 3 Thanks
-
Member
Reputation: 22
Re: Improve HDSPA throughput
Dear,
i think this will increase the drop rate of HSPA service, what do you think?
Originally Posted by
hassan.attique
Dear MPO constant is to adjust CQI. Ue report CQI after that NodeB calculate adjusted CQI in which MPO constant is used. If you decrese MPO constant then CQI has have higher value. If you increase MPO constant CQI becomes lower. Because CQI is the main thing to allocated modulation scheme and TB size so it will impact throughput.
-
Member
Reputation: 28
Re: Improve HDSPA throughput
It is not necessary it will increase drop rate as it is for estimation purpose. Yes it will effect cell edge users. You can try 1.5 or 2 value if in your network it is above then that.
Originally Posted by
Tulipa
Dear,
i think this will increase the drop rate of HSPA service, what do you think?
-
Senior Member
Reputation: 491
Re: Improve HDSPA throughput
Originally Posted by
techfolkcmr
Hi friend,
Login to NodeB and type LST MACHSPARA and post the values. The values you provided are default values of CELL HSDPA and needs little optimisation like Setting No. of codes for HS-SCCH from 4 to 3, HS-PDSCH Constant from 2.5db to 0 (or) 5 but we have tried and didnt get any specific improvements.
Dear what's the idea behind decrease Code Number for HS-SCCH from 4 t o3
-
Senior Member
Reputation: 609
Re: Improve HDSPA throughput
Originally Posted by
justdream
Dear what's the idea behind decrease Code Number for HS-SCCH from 4 t o3
Generally it improves scheduling by limiting users to 3 from 4 and results in throughput increase by margin.
Please add reputation by clicking * at left bottom of post & Hit Thanks and report Helpful by clicking Thumps Up if you like my post . Knowledge is Power & Sharing is Caring.
-
Post Thanks - 1 Thanks
Bookmarks