Thanks Thanks:  0
Showing results 1 to 9 of 9

Thread: RET checking in NetAct

  1. #1
    Member Reputation: 31
    Join Date
    2011-07-16
    Posts
    29


    Default RET checking in NetAct

    Dears,

    Could you please help me how I can report all RET status through NetAct? I know how to check site by site using site IP but no idea how to do it in one step.

    Your help appreciated.

    Ela

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 360
    Join Date
    2012-01-24
    Location
    Every where
    Posts
    351


    Default Re: RET checking in NetAct

    Do you mean value of RET? You can find the "Angle" value in Dump, under LNCEL or RET.
    Best people are those who are useful to others

  4. #3
    Senior Member Reputation: 641
    Join Date
    2009-12-29
    Location
    Pakistan
    Posts
    362


    Default Re: RET checking in NetAct

    Quote Originally Posted by elahetal View Post
    Dears,

    Could you please help me how I can report all RET status through NetAct? I know how to check site by site using site IP but no idea how to do it in one step.

    Your help appreciated.

    Ela

    Use the table A_WBTSF_RET for finding RET values. From serNum you will know the band of the antenna ( 900, 1800, 2100 : the last digit normally tells which band it is. You will know it from the antenna manufacture)
    You need also the table A_WBTSF_RET_ANTLIDLIST to know the sector number from the antlIdList.
    Best Regards

  5. #4
    Member Reputation: 31
    Join Date
    2011-07-16
    Posts
    29


    Default Re: RET checking in NetAct

    HI, Tanks for your reply, but I can not find LNCEL in dump. our RNC is RU40

  6. #5
    Member Reputation: 31
    Join Date
    2011-07-16
    Posts
    29


    Default Re: RET checking in NetAct

    Hi, could you please address me where I can find A_WBTSF_RET ?

  7. #6
    Senior Member Reputation: 641
    Join Date
    2009-12-29
    Location
    Pakistan
    Posts
    362


    Default Re: RET checking in NetAct

    From the MS access dump if you are using the plan editor to parse the dump.

    If you are using some other tool to parse the dump then the table name according to your tool.
    Best Regards

  8. #7
    Member Reputation: 31
    Join Date
    2011-07-16
    Posts
    29


    Default Re: RET checking in NetAct

    Hi,
    I am using NePa for parsing and I couldn't find ant RET value inside. Can it be related to not configured RET?

  9. #8
    Senior Member Reputation: 641
    Join Date
    2009-12-29
    Location
    Pakistan
    Posts
    362


    Default Re: RET checking in NetAct

    Quote Originally Posted by elahetal View Post
    Hi,
    I am using NePa for parsing and I couldn't find ant RET value inside. Can it be related to not configured RET?
    It can be, but I think NePa doesnt parse the RET table, try using Netact Plan Editor.

    Also you can open the CM Editor from Netact and check the RET from there.

    Also note that RET for WCDMA cells can been seen from the WCEL table, there is field with name 'ángle' which gives the tilt (divide it by 10).

    Check from the Nepa output the WCEL table and see if you have any value in the angle field, if no then RET is not configured.
    Best Regards

  10. #9
    Member Reputation: 296
    Join Date
    2009-07-02
    Posts
    231


    Default Re: RET checking in NetAct

    NOKIA dumps are easy to parse to tables, but you will need to prepare some queries linking few tables to get the RET values associated to cells.

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •