-
Member
Reputation: 50
Prevent F3 cell selection ?
Dear Huawei,
What is the best way to prevent the selection of the F3 (discontinious layer in the network). so F3 will be used only in connected mode ?
Br,
Fahmi
-
2015-06-18 05:02 PM
# ADS
Circuit advertisement
-
Member
Reputation: 54
Re: Prevent F3 cell selection ?
Simply just reserve that carrier cells.
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 311
Re: Prevent F3 cell selection ?
Originally Posted by
fahmi
Dear Huawei,
What is the best way to prevent the selection of the F3 (discontinious layer in the network). so F3 will be used only in connected mode ?
Br,
Fahmi
Another choose for you, you can set UE on F3 always search inter frequency (sInterSearch=0) and set highest priority for neighbour cells (offset).
But I think if you use HCS you can get higher utilization for F3. Put UE only on F3 while UE have very good quality, and change to other frequency as soon as when signal drop below the threshold.
-
Post Thanks - 1 Thanks
-
Re: Prevent F3 cell selection ?
Originally Posted by
fahmi
Dear Huawei,
What is the best way to prevent the selection of the F3 (discontinious layer in the network). so F3 will be used only in connected mode ?
Br,
Fahmi
Hi,
Another solution is for F3 which has discontinues coverage restrict reselection according to EcNo measurment which is default value in idle mode behavior. You may change qualMeasQuantity to RSCP with aggressive value for qRscpMin also.
Cheers
-
Users Awaiting Email Confirmation
Reputation: 332
Re: Prevent F3 cell selection ?
random camping setting may be
so F3 just only overflow from F1 or F2
-
Member
Reputation: 82
Re: Prevent F3 cell selection ?
Originally Posted by
sabila
random camping setting may be
so F3 just only overflow from F1 or F2
what about the opposite flow ? F1 F2 from F3. in my case there is a big chance to fail HO
Bookmarks