Thanks:
150
-
Member
Reputation: 187
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Hi
I have tried to install according the steps of Mr.Bin but I got Unauthorised modul (0,1) and also error in devcon failed.
Any idea about how to proceed or new list of steps
many thanks
-
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Can someone please share the ibtallation step I dont have reputation. please guys.
-
Senior Member
Reputation: 591
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Read the rules bdelcio,
you need 15 rep to get to member and be able to download attached files from the forum.
B/R
Still learning.....
If you find my post useful please add reputation and click on Thank You button
My default password is:
HERE
-
Senior Member
Reputation: 591
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Well installed it on a PC and for me the modules were all,
Will recheck it in 2 days as i am away from office but please try a fresh install and check again.
B/R
Still learning.....
If you find my post useful please add reputation and click on Thank You button
My default password is:
HERE
-
Member
Reputation: 187
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Many thanks Samuraial
I have reinstall again and the problem it is still not fixed.
My laptop is with Windows 8.
I don't know if for this version, there is a portable ....
-
Senior Member
Reputation: 591
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Module error ( you didn't install multikey).
Devcon failed.( you didn't use dseo13b to sign the multikey.sys).
Follow this steps.
1-)disable UAC( user authentication smth. search UAC and go lower settings possible)
2-)Open dseo13b and go test mode.( restart after that).
3-)sign a system file (give the path to .sys file not only the folder but the file path) after this one restart.
3-)Try installing multikey, registry after that install.
4-)Replace the .exe and .lic with the one from the m3d.
4-)open the software.
These are the common steps.
So far i don't know if there is a portable version for this one.
Hope it works.
Reps are welcomed.
B/R
4-)
Still learning.....
If you find my post useful please add reputation and click on Thank You button
My default password is:
HERE
-
Post Thanks - 4 Thanks
-
Member
Reputation: 187
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Many thanks Samuraial
I was doing your steps but I got "No devices were removed" and "devcon failed"
My doubts
1. The MultiKey.sys file I have to copy and paste to c:\widows\System32\drivers or it can be in another directory and only to sign system file.
2. I have to disable test mode or not and when.
3. I was using Sentinel System Driver 7.5.2, is it Ok?
Could you please share your Multikey, descon, dseo13b...
Mnay thanks
-
Member
Reputation: 98
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Hi all,
MultiKey_x64 only run on Win7,XP,sever not runing Win8.
multikey on win8 you can search in forums.
Thanks.
-
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
Is it possible to run this solution on x32?
-
Senior Member
Reputation: 591
Re: Atoll 3.3.0.7383 (32-bit & 64-bit)
It is the same as the one Mr.Bin shared my friend,
Try remove the first line from install.bat(edit and remove the "uninstal" line)
I have done it and installed it. Had the same problem but first wanted to sign the file.
@Mr.Bin
Can you share the multikey for Win8? So all possible fixes can be in one thread
@Atolka
Nope my friend you need a Winx64 or you can try install winx64 on a virtual machine in you x32
Thanks in advance.
B/R
Still learning.....
If you find my post useful please add reputation and click on Thank You button
My default password is:
HERE
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks