FLEXNET: HOW TO build your own lmcrypt

[rohank]

Can you please give example of daemon in which patching pubkey verify function is not sufficient to use any value for SIGN1 and SIGN2

Hi in lgcx daemon patching pubkey verify function is not sufficient. i have already sent u pm of daemon and soft which uses this.

[darsy]

Hi in lgcx daemon patching pubkey verify function is not sufficient. i have already sent u pm of daemon and soft which uses this.

Ok,

I'm ready friend.

Regards,

[rohank]

Ok,

I'm ready friend.

Regards,

Hi here are the links. Remember this soft is for linux and uses linux flexnet sdk
For everyone who wants to try.

https://mega.co.nz/#!rdcRzJrB!2WHdmZ...f47KPaq4-3cknA

[carlitos]

darsy I hace watched your HOW TO build your own lmcrypt video and I have a couple of questions. My target is 11.9.1, can I use flexnet SDK 11.4? and visual studio have to be 2006 version?
thanks

[rohank]

darsy I hace watched your HOW TO build your own lmcrypt video and I have a couple of questions. My target is 11.9.1, can I use flexnet SDK 11.4? and visual studio have to be 2006 version?
thanks

carlitos. yes you can use 11.4 for 11.9 target. I have used some lmcypts which was compiles using 11.4 sdk but works with higher versions

[carlitos]

thanks rohank.
What about visual studio versión?. in the tutorial says version 2006.

[carlitos]

i have tried with SDK 11.4 and visual studio 2008 ( i cant find 2006). I follow all the steps in the video but I have this message when i run build: "nmake" is not recognized as an internal or external command

nmake is called in build.bat, but i cannot find nmake

what is it wrong in my procedure?

thanks for help

[kometata]

darsy I hace watched your HOW TO build your own lmcrypt video and I have a couple of questions. My target is 11.9.1, can I use flexnet SDK 11.4? and visual studio have to be 2006 version?
thanks

What about 11.10 and above?
To my best knowledge there is no publicly available versions of SDK 11.10+

[rohank]

i have tried with SDK 11.4 and visual studio 2008 ( i cant find 2006). I follow all the steps in the video but I have this message when i run build: "nmake" is not recognized as an internal or external command

nmake is called in build.bat, but i cannot find nmake

what is it wrong in my procedure?

thanks for help

This is because of path error. I used VS 2006. Darsy has posted links for that version or try finding it on internet.
kometata 11.4 can used for 11.10 and above versions

[carlitos]

rohank thanks again.
one more question: where can I find nmake file, Visual studio folders or SDK11.4 folders?