I have problem when importing configuration data (CFGMML.txt).
"Rate of Progress" reaches 26% very quickly, but then it stays unchanged forever.
Can anyone help please?
Many Thanks,
Try this:
1) Run "COL LOGOGTYPE=BSC_CFG_MML-1;" to generate an updated config file
2) Run "LST LOGRSTINFO:;" to see where the generated file is
3) Use "ftp://YOUR_RNC_IP" to get your .zip file with the .xml config inside (you can import the .zip file directly)
Try this:
1) Run "COL LOGOGTYPE=BSC_CFG_MML-1;" to generate an updated config file
2) Run "LST LOGRSTINFO:;" to see where the generated file is
3) Use "ftp://YOUR_RNC_IP" to get your .zip file with the .xml config inside (you can import the .zip file directly)
Hope that helps you...
Thank you,
I have tried also with zip Config file but the same problem happened.
Is it somehow related to Templates used (UMTS & GSM) in Parameter menu ? Because when the configuration data is checked using GSM or UMTS Config Check, some MOs are not found or some parameters are not passed.
Waiting for your advice,
Bookmarks