Thanks Thanks:  20
Page 1 of 3 123 LastLast
Showing results 1 to 10 of 22

Thread: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

  1. #1
    Member Reputation: 423
    Join Date
    2008-05-20
    Location
    Atlantis :)
    Posts
    439


    3 out of 3 members found this post helpful.

    Lightbulb How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    Friends,
    this is quick brief what I do to connect my phone in TEMS investigation.I hope it will be useful for you.
    Tested&working on Samsung Galaxy S4 mini with qualcomm snapdragon chipset and JB4.2.2.Should work on all Samsung android phones with qualcomm chipset.
    My phone is rooted but I think that no root needed to do this.Works with conventional/market (non TEMS) phones.

    I.Prepare PC
    1. Disconnect phone from PC;
    2. Install latest Samsung KIES for your device and don't forget to tick “Install USB drivers” at end of installation wizard OR install only Samsung USB Drivers from samsung qualcomm usb driver.rar ;

    II. Prepare phone
    *Note that most info in this section is taken from XDA developers forum .Thanks to the author!Great job!
    1. Install phoneutil.apk from phoneutil.rar (check"unknown sources" in security settings in your phone menu in order to be able to install this);
    2. Install QuickShortCutMaker to phone (get it from Android Market);
    3. Now run QuickShortCutMaker,type “PhoneUtil” in a search window, expand result and chose "com.sec.android.app.phoneutil.SerPortUartUsbMSM89 60" as a shortcut. Shortcut will be placed somewhere on phone home screen.
    4. Disconnect phone from PC;
    5. Run PhoneUtil shortcut,then choose MODEM(not mandatory,UART will work too) and below in Qualcomm USB Settings select DM+MODEM+ADB.Press OK. (you have to revert back this step if you want to connect phone as storage device);
    6. Connect phone to PC and waiting windows to install drivers;

    III.Connect to TEMS Investigation
    1.Verify steps above in windows device manager - If everything is OK, you’ll have “SAMSUNG Mobile USB Serial Port (COMxx) in Ports (COM & LPT) section and “SAMSUNG Mobile USB Modem” in Modems section;
    2.Run TEMS investigation and start TEMS Investigation Manual UE Configuration;
    3.Then in “Device Configuration” click on “New…”,select “SAMSUNG Mobile USB CDC Composite Device” and click OK;
    4.For “Type” chose HSPA+ Capable device – Qualcomm C;
    5.Chose “Air Interface” for SAMSUNG Mobile USB Serial Port,and “Data interface” for SAMSUNG Mobile USB Modem;
    6.Click OK,then save and click on “Refresh” button in “Equipment” window;
    7.If everything is OK,TEMS Investigation will detect phone as unknown MSM 7200 and you will be able to connect them;

    That's all – just start with measurements and inform Finetopix community here if you success with other samsung models.

    Confirmed/Working on:
    Samsung Galaxy S4 Mini I9195
    Samsung Galaxy S5 SM-G900F
    Last edited by tremalnike; 2014-09-15 at 02:43 AM
    Best Regards !

  2. Thanks radio_network thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  4. #2
    Member Reputation: 74
    Join Date
    2010-02-16
    Posts
    190


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    Quote Originally Posted by tremalnike View Post
    Friends,
    this is quick brief what I do to connect my phone in TEMS investigation.I hope it will be useful for you.!!!Tested&working on Samsung Galaxy S4 mini with qualcomm snapdragon chipset and JB4.2.2.Should work on all Samsung android phones with qualcomm chipset.
    My phone is rooted but I think that no root needed to do this.Works with conventional/market (non TEMS) phones.

    I.Prepare PC
    1. Disconnect phone from PC;
    2. Install latest Samsung KIES for your device and don't forget to tick “Install USB drivers” at end of installation wizard OR install only Samsung USB Drivers from samsung qualcomm usb driver.rar ;

    II. Prepare phone
    *Note that most info in this section is taken from XDA developers forum .Thanks to the author!Great job!
    1. Install phoneutil.apk from phoneutil.rar (check"unknown sources" in security settings in your phone menu in order to be able to install this);
    2. Install QuickShortCutMaker to phone (get it from Android Market);
    3. Now run QuickShortCutMaker,type “PhoneUtil” in a search window, expand result and chose "com.sec.android.app.phoneutil.SerPortUartUsbMSM89 60" as a shortcut. Shortcut will be placed somewhere on phone home screen.
    4. Disconnect phone from PC;
    5. Run PhoneUtil shortcut,then choose MODEM(not mandatory,UART will work too) and below in Qualcomm USB Settings select DM+MODEM+ADB.Press OK. (you have to revert back this step if you want to connect phone as storage device);
    6. Connect phone to PC and waiting windows to install drivers;

    III.Connect to TEMS Investigation
    1.Verify steps above in windows device manager - If everything is OK, you’ll have “SAMSUNG Mobile USB Serial Port (COMxx) in Ports (COM & LPT) section and “SAMSUNG Mobile USB Modem” in Modems section;
    2.Run TEMS investigation and start TEMS Investigation Manual UE Configuration;
    3.Then in “Device Configuration” click on “New…”,select “SAMSUNG Mobile USB CDC Composite Device” and click OK;
    4.For “Type” chose HSPA+ Capable device – Qualcomm C;
    5.Chose “Air Interface” for SAMSUNG Mobile USB Serial Port,and “Data interface” for SAMSUNG Mobile USB Modem;
    6.Click OK,then save and click on “Refresh” button in “Equipment” window;
    7.If everything is OK,TEMS Investigation will detect phone as unknown MSM 7200 and you will be able to connect them;

    That's all – just start with measurements and inform Finetopix community here if you success with other samsung models.
    i have successfully connected Samsung Galaxy S5 SM-G900F with TEMS.

    Thanks dear.

    So after this there is no need for TEMS Pocket for Samsung Mobiles if we don't want any special testing with TEMS.

  5. #3
    Member Reputation: 238
    Join Date
    2013-07-29
    Posts
    340


    0 out of 1 members found this post helpful.

    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    hi tremalnike

    there is any work around for any other chipset than qaulcom ?

  6. #4
    VIP Member Reputation: 1106
    Join Date
    2008-08-31
    Location
    Around the World
    Posts
    1,030


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    @kkyasir
    still need TEMS pocket for make full function test (Lock cell, PCI, PSC, BCCH), by some phone. see as info bellow:

    The Xperia Z2 D6503 from Sony is an LTE Category 4 phone spanning a generous set of E-UTRA bands. Equipped with Ascom software, it also boasts an imposing array of control functions.
    Frequency bands:
    LTE 2100 (Band 1), 1900 (B2), 1800 (B3), AWS 1700/2100 (B4), 850 (B5), 2600 (B7), 900 (B8), 700c (B13), 700bc (B17), 800DD (B20)
    WCDMA 850 (Band V), 900 (VIII), 1700 (IV), 1900 (II), 2100 (I)
    GSM/GPRS/EDGE 850, 900, 1800, 1900
    Throughput categories:
    LTE Category 4 (150/50 Mbit/s)
    HSDPA Category 24 (42 Mbit/s), HSUPA Category 6 (5.8 Mbit/s)
    GPRS/EDGE Class 33
    Real-time control capabilities applicable in TEMS Investigation:
    RAT lock (LTE, WCDMA, GSM)
    Band lock (LTE, WCDMA, GSM)
    LTE EARFCN/PCI lock
    WCDMA UARFCN/SC lock
    GSM cell lock/multi-lock, cell prevention
    Vocoder lock
    Cell barred lock
    Google Android 4.4
    WLAN 802.11a/b/g/n/ac
    Chipset/CPU: Qualcomm MSM8974AB, quad-core, 2.3 GHz
    Dust and water protected (IP55 and IP58 rated)
    We can share knowledge to all guy join with Wire Free Alliance.

    Many Thank,

    Best regards,

    TEMS_Engineer

  7. #5
    Member Reputation: 423
    Join Date
    2008-05-20
    Location
    Atlantis :)
    Posts
    439


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    Quote Originally Posted by Boraa View Post
    hi tremalnike

    there is any work around for any other chipset than qaulcom ?
    Hi Boraa,
    unfortunately, there is no known way to connect to TEMS stock firmware phone with different than qualcomm chipset.


    About comparison with tems phone - Yes,in this solution control/lock functions missing,but it's free,easy and without any danger for your phone.
    Best Regards !

  8. #6
    Junior Member Reputation: 10
    Join Date
    2011-08-03
    Posts
    2


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    thanks to tremalnike,
    I ve tried with S3-gt i9300 but I could not do it,
    when I set Qualcomm USB Settings selectDM+MODEM+ADB, drivers can not be installed and unknown device

    I ve tried several drivers but no possible,

    what it could be? driver problem or i9300 not supported?



  9. #7
    Member Reputation: 21
    Join Date
    2014-10-22
    Posts
    11


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    It is very useful. Thanks

  10. #8
    BannedUser-MultiAccounts Reputation: 20
    Join Date
    2014-11-20
    Posts
    38


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    Quote Originally Posted by UMITG View Post
    thanks to tremalnike,
    I ve tried with S3-gt i9300 but I could not do it,
    when I set Qualcomm USB Settings selectDM+MODEM+ADB, drivers can not be installed and unknown device

    I ve tried several drivers but no possible,



    what it could be? driver problem or i9300 not supported?


    ===
    ====
    i9300 not support
    you can use i9305

  11. #9
    Junior Member Reputation: 10
    Join Date
    2011-08-03
    Posts
    2


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    Quote Originally Posted by equipment.best View Post
    ===
    ====
    i9300 not support
    you can use i9305
    I try with S5 G900 and it connects to tems 16.1 without problem.

    But not possible to make data test like external modem, only voice call possible.
    Also no band lock, no cell lock as expected.

    Did I do something wrong for data testing? or even orıgınal S5 can not make data testing?

  12. #10
    Senior Member Reputation: 612
    Join Date
    2009-06-16
    Posts
    341


    Default Re: How to connect Samsung android phones with qualcom chipset to TEMS Investigation

    @UMITG you don't have TP installed in your phone, Please install tems pocket along with license then you will be able to do it.
    Nothing Is Impossible To A Willing Heart
    Shared files default restriction passcode is"thankyoufinetopix"

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •