Thanks Thanks:  2
Showing results 1 to 2 of 2

Thread: Cell Reselection Huawei 3G U2100 to Huawei 4G L800

  1. #1
    Member Reputation: 159
    Join Date
    2013-03-21
    Location
    Europe
    Posts
    93


    Default Cell Reselection Huawei 3G U2100 to Huawei 4G L800

    Can anyone help with the reselection from Huawei 3G U2100 to Huawei 4G L800.

    Currently the reselection takes approximately 20 seconds with multiple handsets.

    Radio is in Lab environment.

    Looking for help with regards to the parameters used to reduce this time. Target time is < 5 seconds

    Thanks in advance

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Member Reputation: 264
    Join Date
    2009-03-09
    Posts
    231


    Default Re: Cell Reselection Huawei 3G U2100 to Huawei 4G L800

    Hi,

    can you check the cause for the delay. Is it because of:
    1. After end of the call on UMTS, UE is kept in Cell_FACH/Cell_PCH and not released to idle mode? UE will start reselection to LTE only in idle mode -> you have to send it there earlier
    2. Is 20s from the time UE goes to idle mode in UMTS to the time it reselects to LTE? UE will learn about LTE from SIB19 on UMTS -> you have to make broadcast of SIB19 to be more often.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •