-
Member
Reputation: 38
TRX configuration
I would like to reconfigure all TRXs configured at 1800 to 900 MHz in E*******. what are the MML commands involved to do this? and do I need to redo the frequency planning in order to accommodate the new TRXs in 900?
-
2014-05-16 02:32 AM
# ADS
Circuit advertisement
-
Member
Reputation: 62
1 out of 1 members found this post helpful.
Re: TRX configuration
As my understanding:
- First you need to check the Band Operation Mode, command RLOMP; it must be MULTI if you have two bands.
- Second check the system type, command RLTYP; if you have two bands it must be MIXED.
- You need to change the BAND in command RXMOP to assign the TRX to the right band, you need to change too the command RLDEI parameter CSYSTYPE.
- In some cases you need to check RAEPP, in order to see PROPERTY EBANDINCLUDED is right for your system.
- And you need to change frequency plan too, the BA LIST and all related to frequencies.
Best regards, friend,
Bookmarks