what's ur RAN version
ours RAN 11
what's ur RAN version
ours RAN 11
We have the latest one RAN v15!
password shared in forum :D
can u pl share the values of
LST MACHSPARA (from NodeB)
From RNC
SET USERGBR
LST USERGBR
LST CELL HSDPA (for anyone sector)
You can do traffic sharing on neighbor cells, it's better!! Also, try to check if your r99 traffic is high, you can reset nodeb if that's the case..
btw, some i tried to change max code 15 to 10 and it's okay. did you guys have a reaction on this? changing max code instead of min code?
do you have formula for ce congestion?
Dear Radio_network,
LST MACHPSPARA is not there in RAN 15.
SET UUSERGBROGICRNCID=4322, TRAFFICCLASS=INTERACTIVE, THPCLASS=High, BEARTYPE=R99, USERPRIORITY=GOLD, ULGBR=D64, DLGBR=D64
ADD UCELLHSDPA:CELLID=10124, LOGICRNCID=4322, HSPDSCHMAXCODENUM=15, HSPDSCHMINCODENUM=5, CODEADJFORHSDPAUSERNUMTHD=3, ALLOCCODEMODE=Automatic, HSSCCHCODENUM=4, HSPAPOWER=0, HSPDSCHMPOCONSTENUM=2.5DB, HSDPCCHPREAMBLESWITCH=Mode0, CODEADJFORHSDPASWITCH=ON, HCODEADJPUNSHTIMERLENGTH=5, MIMOMPOCONSTANT=Minus2.5DB, DYNHSSCCHALLOCSWITCH=OFF;
password shared in forum :D
how about reduce further to 2, also check Code LDR switch & dynamic code switch in NodeB
Bookmarks