pleased i reallywant to learn about PRACH,,can you send te material to my email: muntaqo.alfin@gmail.com
Thank You
pleased i reallywant to learn about PRACH,,can you send te material to my email: muntaqo.alfin@gmail.com
Thank You
here is a good explaination:
http://lteuniversity.com/get_trained...lic-shift.aspx
Dear,
Can you pls send me PRACH Planning document on my mail sathishrao4u@gmail.com
Thank you.
Hello,
The PRACH Premable format 0, 1, 2, 3 and 4 (4 is reserved for TDD) are dependant on round trip time which can be translated to Cell Radius. After you define your PRACH Preamble format then you have to define the PRACH Conf index and CS using a standard table (example : Preamble format 1 and RACH density =1 ==> Conf Index = {23,24} TDD and Conf Index = {19,..,21} FDD and for Cell Radius =arround ( 15km ) then CS = 12 and # Cyclis shifts is 119 FDD; this is strictly related to Cell radius due to round trip time). best of luck!
sir, i want to know for PRACH Planning in LTE. can you send file to my email? arsyad.widhianto@gmail.com ... soryy sir but i cant download the file because my reputation
Hello friend, First of all thanks for the document you have uploaded, its very helpful, i did the exercise, but still slightly confused by the PRACHConfigIndex value u calculated for 10 MHz band. You used formula (Overhead = 6/50x3/10=3.6) , now here 10 signifies 10 Mhz what about the other values, how you used them in formula?
and if the answer is 3.6 can we use 19,20,21. if no, why.
You may want to check LTE in Bullets Edition 2. Clarified almost every doubt i had.
Pages 518-528
http://www.4shared.com/rar/I5dVKDZ_ce/00__2nd-Ed.html
Please give reps if you find this useful.
Would you please send this info to my e-mailaulutku@hotmail.com. Thank you !
Bookmarks