-
BannedUser-MultiAccounts
Reputation: 89
PRfiles for RU30
Hi experts , I am looking for description of PRfiles parameters , thanks to support
-
2013-09-19 11:35 PM
# ADS
Circuit advertisement
-
Member
Reputation: 74
3 out of 3 members found this post helpful.
Re: PRfiles for RU30
Originally Posted by
eng.akhalifa
Hi experts , I am looking for description of PRfiles parameters , thanks to support
Here you go. Add rep if you find it useful.
PF_30_x.zip
-
BannedUser-MultiAccounts
Reputation: 89
Re: PRfiles for RU30
thank you for your support , but i can't find the parameter which i am looking for , i am looking for "RN60_MAINT_07" and "RN60_MAINT_06" Thanks
-
Member
Reputation: 74
Re: PRfiles for RU30
I was able to find this information. I'm trying to find the document with the complete explanation.
PRFILE parameter 002:1882 RN60_MAINT_06 is used to define the threshold for "Load_status".
PRFILE parameter 002:1883 RN60_MAINT_07 is used to define the “Time-to-trigger” for changing the "Load_status"
Originally Posted by
eng.akhalifa
thank you for your support , but i can't find the parameter which i am looking for , i am looking for "RN60_MAINT_07" and "RN60_MAINT_06" Thanks
-
Member
Reputation: 74
Re: PRfiles for RU30
It was a little bit hard to get but here is all the info I could get get for those parameters.
The parameters are related to Mass Event Handler feature.
*PRFILE parameter 002:1882 RN60_MAINT_06 is used to define the threshold for
"Load_status":
– If NBR of initial capacity requests higher or equal threshold set by the PRFILE, then “Load_Status” is considered to be “High”
– If NBR of initial capacity requests lower threshold set by the PRFILE, then “Load_Status” is considered to be “Normal”
*PRFILE parameter 002:1883 RN60_MAINT_07 is used to define the “Time-totrigger” for changing the "Load_status":
– If "Load_status" changes from “Normal” to “High”, PRFILE value is used as such
– If "Load_status" changes from “High” to “Normal”, PRFILE value multiplayed by 2, is used.
Please add rep if it was useful.
-
BannedUser-MultiAccounts
Reputation: 89
Re: PRfiles for RU30
thanks , but i still need more details about these parameter setting
-
Member
Reputation: 82
Re: PRfiles for RU30
hello,
PRFILE parameter 002:1882 RN60_MAINT_06 = A
*PRFILE parameter 002:1883 RN60_MAINT_07=1E
These are recommended values.
One more thing:
If you switch oin MEH it is suggested to disable limitation of nb of HSUPA users because it will lead to high HSUPA blocking.
(002:1884) RN60_MAINT_08: Temporary maximum number of HSUPA users - 80H
regards,
-
BannedUser-MultiAccounts
Reputation: 89
Re: PRfiles for RU30
hello,
PRFILE parameter 002:1882 RN60_MAINT_06 = A
*PRFILE parameter 002:1883 RN60_MAINT_07=1E
These are recommended values.
One more thing:
If you switch oin MEH it is suggested to disable limitation of nb of HSUPA users because it will lead to high HSUPA blocking.
(002:1884) RN60_MAINT_08: Temporary maximum number of HSUPA users - 80H
regards
Do you have any document explain it in detail ?
-
BannedUser-MultiAccounts
Reputation: 89
Re: PRfiles for RU30
at least description of the values
-
Member
Reputation: 82
1 out of 1 members found this post helpful.
Re: PRfiles for RU30
MEH.rarMEH.rar
Hi,
I think this would be helpful.
Cheers!
regards,
Bookmarks