-
PING PONG H/O CAUSE AND SOLUTION
CAN ANYBODY TELL ME THE PING PONG H/O CAUSE AND SOLUTION ?
-
2009-03-19 07:08 PM
# ADS
Circuit advertisement
-
Member
Reputation: 179
Number of issues can trigger Ping Pong HO. Main reasons are:
Lack of dominance
Poor quality (due to poor frequency, HSN/MAIO plan etc)
Poor parameter value in CDD (such as wrong handover hysteresis value or penalty timer after emergency HO)
For solution my friend, first find out the root cause, and tailor the solution accordingly.
*This is a very general answer to the question as these types of issues are context dependent.
-
Member
Reputation: 91
Originally Posted by
NILCTG
Number of issues can trigger Ping Pong HO. Main reasons are:
Lack of dominance
Poor quality (due to poor frequency, HSN/MAIO plan etc)
Poor parameter value in CDD (such as wrong handover hysteresis value or penalty timer after emergency HO)
For solution my friend, first find out the root cause, and tailor the solution accordingly
.
*This is a very general answer to the question as these types of issues are context dependent.
pentime is only for cell reselection parameter not for handover my friend
this ping pong is mainly due to handover margin and timer to keep the mobile inside the cell area check also cell hierarchy and rules between cells
-
Member
Reputation: 179
pentime??
what is that? Your point is not clear to me!
-
Member
Reputation: 91
Originally Posted by
NILCTG
pentime??
what is that? Your point is not clear to me!
penalty timer sorry but this the parameter in our database
-
Member
Reputation: 179
I an HW & E// Guy with little exposure to CDMA2000(Qualcomm), I think you are a NSN one.
-
VIP Member
Reputation: 897
Originally Posted by
NILCTG
I an HW & E// Guy with little exposure to CDMA2000(Qualcomm), I think you are a NSN one
.
In GSM , it could be because of the swap in 900/1800 band or a partial swap in 2 sectors !!
Check the logs as well !
-
Member
Reputation: 23
Originally Posted by
simmus0300
CAN ANYBODY TELL ME THE PING PONG H/O CAUSE AND SOLUTION ?
In CDMA System, ping pong H/O usually happen at the border LAC or REGZONE, since LAC=REGZONE.
this can happen because:
- improper border planning, for example: main road become the border between LAC/REGZONE
- When LAC and REGZONE not similar then MS will make too many registration.
- Improper of parameter setting.
Solution:
- you can setting zone timer and other parameter to reduce ping pong effect
- You can change the border area
- You can change antenna setting (tilting, direction, etc)
Hopefully you this can help you,
Thank You,
Newbielinz
-
Member
Reputation: 179
-
Member
Reputation: 83
Why don't u delete some unnecessary relation
if many unnecessary measurement frequency can affect PING PONG
but first you can compare PING PONG HO with Coverage Prediction
Bookmarks