MCOM Problem .

[EngSoft]

hit here ..

guys am working on a frequency plan for a 300 sites phase and am using the MCOM , there will be 2G and 3G site , and am facing a problem that after i build the project , i cant save the changes , a error massage appear and i have upload it here ..

if you can help i will be thankful.
i try the 5.3 and 5.6 and 5.7 all the same problem , the XXXX was the erilock.dll posted by admin .

........ .........

[hassen]

ok you have a problem did you try mcom 2005 that i posted
try and let me know

see the link
http://www.finetopix.com/showthread.php?t=1152

br hassen

[apo7]

There seems to be some problem with cell "34431". Check your mapinfo table to see whether it matches with the MCOM format or not.

[EngSoft]

Hi guys .

thanks for the support , well u try the Mcom2005 as well as the 5.6 and 5.7 there is the same problem , sometime it accept the modification , but most of the time it didnt !!!

and its not specific for a cell !! but i used this one as a example.

it seam there is in something in the erilock.dll but i don't know . as when you check the license it say it is expired but the program is running !

any suggestion

[hassen]

Hi guys .

thanks for the support , well u try the Mcom2005 as well as the 5.6 and 5.7 there is the same problem , sometime it accept the modification , but most of the time it didnt !!!

and its not specific for a cell !! but i used this one as a example.

it seam there is in something in the erilock.dll but i don't know . as when you check the license it say it is expired but the program is running !

any suggestion

yes you are right but not for mcom 2005

[phuonglv]

I download MCOM 5.6 & ***** file, Install and copy EriLock.dll to install folder
But after run software require register
Any body can show me how to ***** MCOM 5.6.

If anybody have another ***** file( MCM5.6) pls send to me by email: javavn.phuong@gmail.com

Thanks.

[EngSoft]

well try again and give you the feedback ...

thanks alot hassen

[Huyhq]

I download MCOM 5.6 & ***** file, Install and copy EriLock.dll to install folder
But after run software require register
Any body can show me how to ***** MCOM 5.6.

If anybody have another ***** file( MCM5.6) pls send to me by email: javavn.phuong@gmail.com

Thanks.

Just type anything in the licience key and then press "register" you will get 180 days of use but don't worry about this period, it's always 180 days .