-
How to check IP address with mml command ?
Hi all,
is there anyone who know how to check the physical ( not the O&M ) physical IP address of a bts nodeB and e-nodeB ?
reputaion will be applied for the right answer .
thanks.
-
2013-04-14 02:34 AM
# ADS
Circuit advertisement
-
Member
Reputation: 93
Re: How to check IP address with mml command ?
You can use "LST SCTPLNK" or "LST IPPATH" for getting Node B CP/UP IP address.
Please add REP if it is useful for you.
BR,
Ivan
-
Re: How to check IP address with mml command ?
for RNC and BSC ??? is there anyone who could explain better ?
Thanks in advance.
-
Junior Member
Reputation: 12
Re: How to check IP address with mml command ?
For NodeB and eNodeB, if you wand to get Physical IP you should use following MML:
LST DEVIP:; (it will give you physical IP of WMTP or UMPT-U / LMPT UMPT-L)
For MBSC if you want to get all the IP configured on the OMU board, you should run the DSP OMU:; command. It will give you the external and internal fixed IP and Virtual IP. Also backup IP (used for both Activae and Sby OMU to communicate together).
Br,
-
Re: How to check IP address with mml command ?
You can run LST IPPATH, soure IP is nodeb ip and peer ip is RNC ip...
may its useful
-
Junior Member
Reputation: 13
Re: How to check IP address with mml command ?
from Nb:
lst devip
lst ethip
lst ippath
lst iprt
from RNC:
lst unodeb
lst ippath
-
Re: How to check IP address with mml command ?
Bookmarks