-
Member
Reputation: 46
Swap RBS3000 to RBS6000
Hi Guys,
I wanna ask you what are the strategies used for this swap.
BR//
-
2013-03-17 07:36 AM
# ADS
Circuit advertisement
-
Member
Reputation: 46
Re: Swap RBS3000 to RBS6000
-
Member
Reputation: 22
Re: Swap RBS3000 to RBS6000
ok , it's a long story but here's the main issues especially Major work steps :
1- the survey is number one ( survey person must visit the site to determine existing equipment and create detailed report with print screens and photos to be sent to the design dept.)
2- design dept. to make the design using 6000 series equipment to achieve the same exisiting 3000 configurations , taking into consideration future customer expansions .
3- design dept . to issue required civil actions .... for example new fiber path , new rox-tech installations ,new Fixation Brackets (side arms on tower) ..etc
4- Create the Main BOQ for each Site .
5- Delivery team to arrange for equipment delivery to site.
6- telecom team to check missing materials or any new required Civil work ..
7- Integration team to take the LOG for the Site before swap ...
8- radio team to check site performance before and after swap .
9 - Acceptance process to be completed ........
=====================
if your question is about step no.6 only ,,, i can give you more details about it later on
-
Member
Reputation: 46
Re: Swap RBS3000 to RBS6000
Thanks MAZ29,
I Would like to asky if you could tell me what are the main problems you could face during the swap procedures as we should take care of them and avoid them occuring.
Thanks indvance.
-
Re: Swap RBS3000 to RBS6000
usually there is no major problem on site during swap, as along as the survey and material delivery, for the particular site is correct. Bring spare modules, like DU, RU, link cables....
-
Junior Member
Reputation: 10
Re: Swap RBS3000 to RBS6000
Can somebody support me with software to access on RBS3000 and RBS6000 and the type of cable
-
Re: Swap RBS3000 to RBS6000
Originally Posted by
driss240
Thanks MAZ29,
I Would like to asky if you could tell me what are the main problems you could face during the swap procedures as we should take care of them and avoid them occuring.
Thanks indvance.
Another thing you have confirm that the rectifier used in the site suffieceint to supply RBSs and Transmmission equipments
-
Member
Reputation: 22
Re: Swap RBS3000 to RBS6000
there are many problems you may face :
1- Poor team competence (result in outage over specified time window , equipment damage , poor installation ...etc )
2- technical problems (alarms , team can not get equipments to work ...etc )
3- power problems .
4- transmission problems
Bookmarks