setup_CrossWave402.r2574_x86

[awaichufengxia]

Dear friends:
here is downlink of setup_CrossWave402.r2574_x86
. http://www.4shared.com/file/7CQTqxkd...r2574_x86.html

[awaichufengxia]

Dear friends:
here is downlink ofsetup_CrossWave404r2643_x64
http://www.4shared.com/zip/N9sRgUPW/...r2643_x64.html

[labviewlover]

thanks a lot for the nice share

any idea about the med. for both releases?


regards

[dmitry28]

Crosswave User Reference Guide 404

http://www.4shared.com/zip/OJGe82m-/...nce_Guide.html

[probabaja]

thanks a lot for the nice share

any idea about the med. for both releases?

regards

The installer setup_CrossWaveXXX.rYYYY.exe enables you to install the XXX version
of the CrossWave model (build YYYY) on the Atoll platform.

[dmitry28]

The installer setup_CrossWaveXXX.rYYYY.exe enables you to install the XXX version
of the CrossWave model (build YYYY) on the Atoll platform.

I think this is wrong. I I've worked with CrossWave on version 2.8.0 and 3.1

[vivainter]

Any news for med??
have someone working building vector file? Are building vector on Mapinfo format only ?
Thanks

[dmitry28]

Any news for med??
have someone working building vector file? Are building vector on Mapinfo format only ?
Thanks

CrossWave can take more than one 3D building vectors files (.tab format) into
account. Valid 3D building vectors files contain at least two columns with the
following headings:
- Polygon_Type: Valid values in this column include “Buildings”, “Forest”,
“Water”, or “Bridge”.
- AMSL or AGL: Valid values in this column include the height (in meters) of
the building above the ground (if the column title is “AGL”) or height above
sea level (if the column title is “AMSL”). When both AMSL and AGL columns
are present, the model considers in priority the AGL value
Note: you have the possibility to use feet unit, in this case, column has to be called
AMSL_FEET or AGL_FEET
Note: the model manages only ‘Polygon’ objects of the MapInfo format
Each file must have the same coordinate system as the project:

[vivainter]

Dear Dimitri28,
you report the information on crosswave manual.
have you available one building vector file example working ?
can you share
Thanks

[dmitry28]

Dear Dimitri28,
you report the information on crosswave manual.
have you available one building vector file example working ?
can you share
Thanks

Try to import maps from the archive.
In the atoll.ini file must be added to the [MITAB]
Earth Projection 8, 104, "m", 39, 0, 0.9996, 500000, 0 = 32637
moscow_3d_test_ CrossWave_and_Volcano_2m.zip