ALU CDMA - remote getting Lon/Lat?

[VitalyK]

Hi All,

Does anybody know is there any command on ALU CDMA ECP for remote getting coordinates from BTS' GPS board?

[dmitry28]

Hi All,

Does anybody know is there any command on ALU CDMA ECP for remote getting coordinates from BTS' GPS board?

This add-on is purchased separately from the ALU. The coordinates can be read from a BTS using RMT.

[erraviesh]

yeah there are scripts, which you have to put in OMP through root login.
After that you need to run some commands from omp-shell. These scripts are applicable to models only not legacy.

[VitalyK]

I found out that there is the utility GET_GPS, but it doesn't work on some SW Release.

[dmitry28]

I found out that there is the utility GET_GPS, but it doesn't work on some SW Release.

Tell me more. Where did you find this script and how to use it. Can you put it on the forum

[VitalyK]

Tell me more. Where did you find this script and how to use it. Can you put it on the forum

One of my friend told me, it looks like this:
omp root>
omp root> ./get_gps -cell 1
Please supply AP root login:

Please supply AP root password:
Please supply RNC active lead login:

Please supply RNC active lead password:

SCRIPT START: 01/23/13 12:11:05 Ver 5.4
MAIN: Figuring out flx for 001-02 ...... flx17
==============================================================================
CEL-CDM AP BOARD DATE GPS-TIME LATITUDE LONGITUDE T/V SS
------------------------------------------------------------------------------
001-01 ap1 .
001-02 flx17 .
------------------------------------------------------------------------------
T/V=Tracking/Visible Satellites SS=Signal Strength 01/23/13 12:11:05 Ver 5.4
==============================================================================

T:gotoAP (001-01): Login to ap1 successful
E:getIpAdrs (001-01): 1x ip =
T:SBSPlogin (001-01): Shelling to 1
E:gotoCELL (001-01): Login to Controller Successful SBSP=10.
==============================================================================
CEL-CDM AP BOARD DATE GPS-TIME LATITUDE LONGITUDE T/V SS

But it doesn't work on the release i need.