Thanks Thanks:  0
Page 1 of 2 12 LastLast
Showing results 1 to 10 of 11

Thread: High RTWP

  1. #1
    Member Reputation: 37
    Join Date
    2010-06-25
    Posts
    107


    Default High RTWP

    Hi Sirs,

    What solution is needed in order to eliminate high RTWP in these scenario.

    F1 has high RTWP (average of -68) while F2 is working in normal condition. Huawei System.


    Br//

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 313
    Join Date
    2010-09-13
    Location
    2G/3G
    Posts
    150


    Default Re: High RTWP

    Quote Originally Posted by chronix_ray View Post
    Hi Sirs,

    What solution is needed in order to eliminate high RTWP in these scenario.

    F1 has high RTWP (average of -68) while F2 is working in normal condition. Huawei System.


    Br//
    Check F1 has high RTWP all day or only busy hours.

    BR.

  4. #3
    Member Reputation: 37
    Join Date
    2010-06-25
    Posts
    107


    Default Re: High RTWP

    Hi Sir,

    F1 has high RTWP all day. and F2 has none.

    Br//

  5. #4
    Junior Member Reputation: 11
    Join Date
    2011-09-26
    Posts
    6


    Default Re: High RTWP

    Hi Sir,

    Can you check surrounding cells covering to the same area,, if only F1 has high RTWP I think the possibility is due to external interference. If surrounding cells also have high RTWP so you should do frequency scanning.
    Please correct me if I am wrong.

    BR

  6. #5
    Member Reputation: 37
    Join Date
    2010-06-25
    Posts
    107


    Default Re: High RTWP

    Thanks, I thought there has something to do with the parameters.

  7. #6
    Junior Member Reputation: 13
    Join Date
    2008-10-05
    Posts
    20


    Default Re: High RTWP

    High load can't not bring RTWP to -68dBm. usually it's external interference. Do check:
    - surrounding, same direction cell whether their RTWP affected by same located interference
    - swap feeder, hardware to check whether it belongs to hardware or feeder/antenna problem

  8. #7
    Member Reputation: 24
    Join Date
    2012-10-29
    Posts
    12


    Default Re: High RTWP

    what is your strategy? have both Frec balanced??? or the most of the traffic is in just one freq?

  9. #8
    Member Reputation: 173
    Join Date
    2009-01-23
    Posts
    52


    Default Re: High RTWP

    Quote Originally Posted by chronix_ray View Post
    Hi Sir,

    F1 has high RTWP all day. and F2 has none.

    Br//
    Had the same problem, but on F2 cells

    after investigation, it was a DECT that interfers

    while we wait for the interferer to be shut down, i temporarily change the frequency on my F2 cells to F3
    Qos improved as soon as i changed (DCR, CSSR, Rach trouble)
    only downside is we lost dual carrier as frequencies are not adjacent anymore

  10. #9
    Junior Member Reputation: 10
    Join Date
    2011-09-14
    Posts
    1


    Default Re: High RTWP

    How many sectors do you have on your NodeB? Is your F1 and F2 contiguous? I would suspect internal interference if you're not seeing it on any other cells in the area on the same freq.

  11. #10
    Senior Member Reputation: 448
    Join Date
    2008-10-31
    Posts
    288


    Default Re: High RTWP

    check the antenna, is there tma inserted or not, if there is tma then tune up the RxAttn parameter also u can check the intra freq neighbor relation in front cells which can make interference also....

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •