Moshell Command Line Assistance

[support]

I am entering Moshell commands to configure an LTE RBS. I am attempting to create an ipinterface with the following command:

cr Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1.

Attribute 4 of 4, vlanRef (moRef:ManagedObject):

Enter mo LDN: vlanRef=900

I receive the following error:

!!!! Processing failure :se.e*******.cello.moframework.WrongAttributeTypeException TAG :"WrongAttributeType" VARIABLES :"$moTypeName" = "Vlan", "$attrName" = "vlanRef"

What are the permissible values for the LDN?

[moslyi0891]

I think you need to check the associated help

[balaprashanth90]

I am entering Moshell commands to configure an LTE RBS. I am attempting to create an ipinterface with the following command:

cr Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1.

Attribute 4 of 4, vlanRef (moRef:ManagedObject):

Enter mo LDN: vlanRef=900

I receive the following error:

!!!! Processing failure :se.e*******.cello.moframework.WrongAttributeTypeException TAG :"WrongAttributeType" VARIABLES :"$moTypeName" = "Vlan", "$attrName" = "vlanRef"

What are the permissible values for the LDN?

Yes. It will give u the error.

Bcoz , you are not supposed to give the vlanref on that place.

Instead, just type the below info.

IpSystem=1,IpAccessHostEt=1,IpSyncRef=8

Probably its asking the Synchronization refference resources.

Please let me know what happens.

So that i can give u further info/-.