-
Member
Reputation: 53
WCDMA LAC and Cell ID in ACTIX
Hi Guys,
How can I see Cell ID and LAC indormation for serving cells in Actix.
Have you any idea?
Thank you
-
2012-06-23 11:32 AM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 321
Re: WCDMA LAC and Cell ID in ACTIX
Hi bro,
you can see cell id and lac. which techno? gsm ,umts? Example directory for gsm, "GSM/serving parameters/servcı" is cell id, "GSM/serving parameters/serv lac" is lac
-
Re: WCDMA LAC and Cell ID in ACTIX
Originally Posted by
vasili_koslov
Hi bro,
you can see cell id and lac. which techno? gsm ,umts? Example directory for gsm, "GSM/serving parameters/servcı" is cell id, "GSM/serving parameters/serv lac" is lac
He is asking for 3G part.
Actually i am using rarely Actix and using when analyzing logfiles. referring PSC(primary scrambling code) to see serving cells.
Last edited by zaebolll; 2012-06-24 at 02:55 AM
-
Member
Reputation: 53
Re: WCDMA LAC and Cell ID in ACTIX
Hi,
Thank you
I know we can find CI by primary SC but sometimes TEMS is sending CI information (this CI (real CI) is coming from system )
I want to learn is there any window or message to see CI in ACTIX
Thank you
-
Senior Member
Reputation: 321
Re: WCDMA LAC and Cell ID in ACTIX
I think CI sending is not mandatory for 3g. It changes depending vendor.
-
Re: WCDMA LAC and Cell ID in ACTIX
You can put this in a binned query. Format group is "Long"
state(Uu_RRC_SysInfoType3_cellIdentity) - state(Uu_RRC_new_U_RNTI_srnc_Identity) * 65536
You can try "Uu_RRC_LAI__lac" attribute to see 3G LAC. Sometimes GSM parameter ServLAC is also set even you are at 3G system.
BR,
Rooster[BG]
Originally Posted by
ozgurzcn
Hi Guys,
How can I see Cell ID and LAC indormation for serving cells in Actix.
Have you any idea?
Thank you
-
Post Thanks - 2 Thanks
-
Member
Reputation: 53
Re: WCDMA LAC and Cell ID in ACTIX
Thank you Rooster
it is working but some CI value is coming wrong etc. 99947
also I checked SC and CI value sometimes it is not match on the map
sc.jpg
There is 14 Cell ID and 41 SC in the same logs (There is no re use SC )
Have you any idea for this issue
Thank you again
Last edited by ozgurzcn; 2012-07-07 at 09:30 PM
-
Re: WCDMA LAC and Cell ID in ACTIX
I know that this doesn't work always, but this is the only possibility I know of.
I use Uu_Active_SC_0 and CellID query only when I have doubt about crossed site.
BR,
Rooster[BG]
Originally Posted by
ozgurzcn
Thank you Rooster
it is working but some CI value is coming wrong etc. 99947
also I checked SC and CI value sometimes it is not match on the map
sc.jpg
There is 14 Cell ID and 41 SC in the same logs (There is no re use SC )
Have you any idea for this issue
Thank you again
Bookmarks