License Alarm

[mpaizal]

Hello expert,
Can someone advise me on below alarm:

================================================================================================
Date & Time (Local) S Specific Problem Cause Mo-Reference
================================================================================================
2012-05-02 16:04:33 m NodeBFunction_DlHwUsageExceedsDlLicenseLevel configuration_or_customizing_error NodeBFunction=1

Regards,

[spiderman]

Hallo bro.
the license alarm after or before integrated by RNC/Integrator teams???

I am not the expert, but maybe on the alarm description i think there are missmatch on Hardware capacity with RNC Configuration while integrating.

First, checked your hardware capacity, compare configuration on CDR with actual hardware like CE capacity or etc, and the last may you need to ask the RNC to checked is there any something wrong while integrated site.

Thanks

[zsfrwst]

Hi,
U can use this cmd "invh" by moshell
then find below info, 3000 RBS (1TX=384 DL CE）6000（DU10=128 DL CE , DU20=384 DL CE , DU30=768 DL CE),compare hw & License DL CE
"CXC4010071/4003 RbsChannelElementsDownlink 1 32 384

btw: if RBS without one enabled (RRU\RU),U will find alarm of （DL & UL）

Hello expert,
Can someone advise me on below alarm:

================================================================================================
Date & Time (Local) S Specific Problem Cause Mo-Reference
================================================================================================
2012-05-02 16:04:33 m NodeBFunction_DlHwUsageExceedsDlLicenseLevel configuration_or_customizing_error NodeBFunction=1

Regards,

[ahmadleb3]

thanks, it works with me . but this alarm means good as u can mention to the customer that you need to enable more feature and to add more eq. to the node as the usage excceds the license