Flash Xperia Arc By using setoolbox

[husseinmanaf]

Hi all

I need to know Please how can I flashing xperia arc Lt15i by using setoolbox?
I need steps plz because i tried with test point also procedure but when he try to upload data it show me error....?



Thankx in advance

[hp3hp3]

Hi all

I need to know Please how can I flashing xperia arc Lt15i by using setoolbox?
I need steps plz because i tried with test point also procedure but when he try to upload data it show me error....?
Thankx in advance

options: signed mode, altbypass mode

press flash, follow program instructions.
you will need to do testpoint, it is very simple, photo can be found in dist\docs

after that, fully turn phone on, it will take relatively long time, about 5 minutes.
do not remove battery or power off phone, while it starting up - you can damage battery gauge firmware.

when phone fully power on, run tems pocket application, it will tell you that you need license in order to run it and quit.
now, go to settings, applications, development, turn on USB debugging
connect phone to PC, install ADB drivers from dist\drivers\adb_drivers

now copy
generated_license.lic
generated_license.lix

to install directory and run install.cmd

done.

[husseinmanaf]

When i press flash it show me error :
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000000

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
qcReceivePacket: can't get packet data.
FAILED TO SETUP PHONE
Elapsed: 18 secs.

[hp3hp3]

for flash u need last ver setool

https://rapidshare.com/files/1861530869/v1.1204.rar

you need to have activated setool2 dongle ( can run latest setool2 version )

[rfoptman]

When I try to identify my xperia arc by Setool box, I have this error, may you help me how to solve it please:
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
qcReceivePacket: can't get packet data.
CAN'T LOAD IDENTIFICATION LOADER.
Elapsed: 16 secs.

Can u please tell me what's the meaning of "ATTACH TESTPOINT", here?

[husseinmanaf]

Brother
i already have it before in I used it ...
But show me this error ???????????

BR

for flash u need last ver setool

https://rapidshare.com/files/1861530869/v1.1204.rar

you need to have activated setool2 dongle ( can run latest setool2 version )

[GEZA]

here is the original tutorial from the_laser:

you need to get special setool2 version first
( replace with new files same files from 1.1203 version )
( tems r3b firmware also there )
http://www.4shared.com/zip/kaWyDhyJ/yustas.html
then you need give me identify output.
next actions:

i will send you :

generated_semcboot.zip
generated_license.lic
generated_license.lix

add to firmware area in order
generated_semcboot.zip
lt15_tems_r3b.zip

options: signed mode, altbypass mode

press flash, follow program instructions.
you will need to do testpoint, it is very simple, photo can be found in dist\docs


after that, fully turn phone on, it will take relatively long time, about 5 minutes.
do not remove battery or power off phone, while it starting up - you can damaged battery gauge firmware.

when phone fully power on, run tems pocket application, it will tell you that you need license in order to run it and quit.
now, go to settings, applications, development, turn on USB debugging
connect phone to PC, install ADB drivers from dist\drivers\adb_drivers

now copy
generated_license.lic
generated_license.lix

to install directory and run install.cmd

done.

[hngydx]

here is the original tutorial from the_laser:

you need to get special setool2 version first
( replace with new files same files from 1.1203 version )
( tems r3b firmware also there )
http://www.4shared.com/zip/kaWyDhyJ/yustas.html
then you need give me identify output.
next actions:

i will send you :

generated_semcboot.zip
generated_license.lic
generated_license.lix

add to firmware area in order
generated_semcboot.zip
lt15_tems_r3b.zip

options: signed mode, altbypass mode

press flash, follow program instructions.
you will need to do testpoint, it is very simple, photo can be found in dist\docs


after that, fully turn phone on, it will take relatively long time, about 5 minutes.
do not remove battery or power off phone, while it starting up - you can damaged battery gauge firmware.

when phone fully power on, run tems pocket application, it will tell you that you need license in order to run it and quit.
now, go to settings, applications, development, turn on USB debugging
connect phone to PC, install ADB drivers from dist\drivers\adb_drivers

now copy
generated_license.lic
generated_license.lix

to install directory and run install.cmd

done.

HI,can you share me a link of this :"generated_semcboot.zip" thanks!!!

[sanp007]

flash program updata firmware for SE new mobile need new setools?

I have only old setools box!

[vasili_koslov]

Dear GEZA,

I need some information about flashing.Please share your experience.

1-what is setool special version ? How I can take it? I found some setool setup but when ı run it ,a error appears "smartcard not found". Do you have a ******** for setool?
2-Can you share setool 1.1204 or 1.1203 with ********?
3-You said "I will send generated_semcboot.zip, generated_license.lic ,generated_license.lix" I can not found.

So thanks expert.
Best Regards.

here is the original tutorial from the_laser:

you need to get special setool2 version first
( replace with new files same files from 1.1203 version )
( tems r3b firmware also there )
http://www.4shared.com/zip/kaWyDhyJ/yustas.html
then you need give me identify output.
next actions:

i will send you :

generated_semcboot.zip
generated_license.lic
generated_license.lix

add to firmware area in order
generated_semcboot.zip
lt15_tems_r3b.zip

options: signed mode, altbypass mode

press flash, follow program instructions.
you will need to do testpoint, it is very simple, photo can be found in dist\docs


after that, fully turn phone on, it will take relatively long time, about 5 minutes.
do not remove battery or power off phone, while it starting up - you can damaged battery gauge firmware.

when phone fully power on, run tems pocket application, it will tell you that you need license in order to run it and quit.
now, go to settings, applications, development, turn on USB debugging
connect phone to PC, install ADB drivers from dist\drivers\adb_drivers

now copy
generated_license.lic
generated_license.lix

to install directory and run install.cmd

done.