Our company had upgraded our planning tool Atoll from V2.8 to V3.1 last year, I was still working on V2.8 due to its simplicity, recently It was a must to work on V3.1 as per to our customer request but I have an issue in that I can't modify Electrical Down Tilt parameter from transmitter box nor Transmitters table (grey colour),
So, How can I modify it (without doing copy-paste since Atoll ACP will report an error)???
-------------------------------------------
Thanks and Reputation are highly appreciated
You need to get the antenna pattern for each degree of electrical tilt. And when choosing an antenna in the transmitter menu to specify a pattern to the desired angle.
First you need to be sure that the antenna pattern you are using doesn't already come with a tilt; once you are sure you need more additional electrical downtilt, you can do the following:
In the installation folder of Atoll in Program files, find the "Atoll.ini" file. Add the following lines to the file and save it;then restart atoll..... [Antenna] REDTDisplay = 1
By default, the above parameter is set to 0.PLease let me know how it goes. Also I need some reputation if this works!
And yes, you need Administrator to do the above.
Last edited by s.sunilpal123; 2012-04-12 at 02:31 PM
First you need to be sure that the antenna pattern you are using doesn't already come with a tilt; once you are sure you need more additional electrical downtilt, you can do the following:
In the installation folder of Atoll in Program files, find the "Atoll.ini" file. Add the following lines to the file and save it;then restart atoll..... [Antenna] REDTDisplay = 1
By default, the above parameter is set to 0.PLease let me know how it goes. Also I need some reputation if this works!
And yes, you need Administrator to do the above.
are your following step make available to insert value in the additional electrical tilting in atoll 3.1?
Bookmarks