RBS Names in Moshell

[ankiyani]

Does any body know Moshell Command to gethe RBS names of an RNC?

I will add REP and Thanks for the answer.

[ivanbrij]

> pr iublink

BR,

Ivan

[jamal]

Dear Mate,

You can activate "userlabel" by "ul" command

then "st iublink"

or if you want to query specific RBS, input the command "get iub user xxxx" where xxxx is part name of RBS that you query.

Hope help.

BR//

[consultant]

the best one is
strt
to get Iub, cells, channels and transmission status

please add rep

[ximie]

pls try
get 0

XXXXAU> get 0
120412-23:43:24 172.27.96.196 7.1z RBS_NODE_MODEL_L_10_9 stopfile=/tmp/889
=================================================================================================================
0 ManagedElement=1
=================================================================================================================
ManagedElementId 1
applicationConfiguration t[0] =
faultTolerantCoreStates s[1] = ManagedElement=1,Equipment=1,Subrack=1,Slot=1,PlugInUnit=1;Active
healthCheckResult Struct{3}
>>> 1.healthCheckResult = 99
>>> 2.message =
>>> 3.startTime =
healthCheckSchedule t[0] =
logicalName XXXXAU
mimInfo Struct{3}
>>> 1.mimName = RBS_NODE_MODEL_L
>>> 2.mimVersion = 10.9
>>> 3.mimRelease =
mimName RBS_NODE_MODEL_L
productName RBS3418
productNumber 11/COH1092082
productRevision
productType Node
site XXX XXXX
userLabel XXXXAU

[outcry007]

if you couldn't check rbsname , please quit your browser and find a document about moshell and study hard