-
Member
Reputation: 89
E// Parameter maxnumeulusers and eulservingcelladm
Dear experts,
what would be the impact on KPI's if we set the parameter maxnumeulusers to 32 per cell in Node B and eulservingcelladm to 16 in RNC for the cell?
RNC is 3820 and Node B is 6000 series.License capacity for eul users is 32 per cell.
-
2012-03-24 11:26 PM
# ADS
Circuit advertisement
-
Member
Reputation: 89
Re: E// Parameter maxnumeulusers and eulservingcelladm
Experts,waiting for your comments ....will it affect the hsdpa throughtput,power and signalling ?
Now its been set to 16 users per cell in node B and 4 in RNC W10.
-
Senior Member
Reputation: 549
1 out of 1 members found this post helpful.
Re: E// Parameter maxnumeulusers and eulservingcelladm
eulServingCellUsersAdm
- Cell admission limit for # Eul users, both 2 and 10ms
- Set this to the licensed value of max number of eul users per cell (maxNumEulUsers - Depends on SW licence on number of users)
eulServingCellUsersAdm=maxNumEulUsers
Admission Control shall reject an EUL user, requesting the cell as serving cell if the total number of serving cell EUL users including the requested is above eulServingCellUsersAdm.
Last edited by aygo; 2012-03-28 at 04:59 AM
-
Member
Reputation: 89
Re: E// Parameter maxnumeulusers and eulservingcelladm
Thanks a lot for your reply...i jus want to know that increasing the value for above mentioned para will have any impact on the other things also i.e HSDPA throughput,total Power or anythingelse...what should be the recommended value if eulServingCellUsersAdmTti2 is not used in the N/W.
-
Member
Reputation: 89
Re: E// Parameter maxnumeulusers and eulservingcelladm
waiting for experts comments .........
Bookmarks